Jump to content
SAU Community

Hook Up Oil Temp Gauge

Dizmo

By Dizmo,
in General Maintenance

 Share

Recommended Posts

Dizmo Enthusiast

Dizmo

Posted
Posted

Just bought electric oil temp gauge and the wiring diagram is in japanese and is rather confusing.

It is a Racetech oil temp 2":

3d_1_b.JPG

The wires coming out are

Red

Black

White

Green

Its obvious where the red (+ve) and black (-ve) go bout what about the other two?

The wires coming off the sensor are black and white.

Any help plz

Cheers

Ryan

Link to comment
https://www.sau.com.au/forums/topic/127583-hook-up-oil-temp-gauge/
Share on other sites
Omurru Veteran

Omurru

Posted
Posted (edited)

I have the exact same problem, but with a couple of chrono gauges :(

I was told:

one will be constant positive (red)

one will be a switch to turn it on, ie. accessory line (one of the other 2)

one will be a switch to turn on the backlights, ie. a instrument light (one of the other 2)

one will be the ground (black)

as to which is which I have no idea, as to where to find the switch and backlight feeds the good old ciggy lighter and the light around it are a good place to start :) Will just have to fiddle around with which wire goes to what, if the gauge light comes on when the car is on but lights are of you hooked em up the wrong way round :(

Edited by Omurru
SECURITY Grand Master

SECURITY

Posted
Posted

green should be for the sensor, the white one should connect to the lights (so it dimms when you turn your lights on). thats how it is on mine. my gauges look similar.

best way to find out is to connect the black/red normally then tap the white and green wire to a known +ve to see if which one is for the dimmer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...