Jump to content
SAU Community

Recommended Posts

Id recomend the 300v 10/40 its great the line loves it, oil filter cant go past genuine Nissan their cheaper than all the others and come pre-lubed ( the only cheap nissan part ).Gearbox i just use Castrol semi synthetic

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2364639
Share on other sites

Is the Motul 8100 a true synthetic oil or just a modified mineral oil with synthetic on the lable? The reason i ask is because on their site the other synthetic oils specifically say they are ester based, but not the 8100.

I am currently using Motul 8100 but may change if it turns out it is not a true synthetic.

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2365766
Share on other sites

There's not much info out there on the stdish range of Fuchs. I looked at it and really tried to dig up some voa's and uoa's with little success. :(

There silkolene range however is a very nice oil but isn't available anywhere in Adelaide that I know of.

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2365875
Share on other sites

The 8100 is a full pao based oil.

It is a 100% synthetic as are mobil 1 etc.

The next step up is a ester based synthetic oil.

Actually .... its a lil more complicated than that. :(

Apparently their 8100 E-Tech 0W40 is a PAO/Ester blend whilst their 8100 X-cess 5W40 is a Group III blend. Hence the fair price difference too. Real world differences? Probably not much unless you do long drain intervals, a rarity on SAU. :O

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2366007
Share on other sites

Who knows. :(

I emailed Motul some time back and they replied it is a 100% PAO oil with the E-Tech being a PAO/Ester (Group IV/V) blend.

I believe PAO can only be GRP IV?

Why manufactures don't list exactly what the oil is on their web site is beyond me. :O The only mob that do is Mobil.

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2366072
Share on other sites

So the 8100 is ok to use, it was just wierd that its discription was so broad. It didn't even mention that is could be used in turbo engines. I'm guessing they want to talk up the more expensive oils so we buy them and not the cheaper ones that can probably do a satisfactory job.

At the end of the day i don't know anything about oils, i can only go on what i pick up here and there.

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2366103
Share on other sites

Whats it worth.. Last I checked I think it worked out some where around $120 for an oil change with 1ltr to spare. So next change will be slightly cheaper.

I'll go the 10w40.

oh the thought of a ester cleaned motor so clean you can eat off it. :(

Link to comment
https://www.sau.com.au/forums/topic/127827-what-engine-oil/#findComment-2366224
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...