Jump to content
SAU Community

Recommended Posts

Nissan Skyline R33 GTST

Hey i was wondering if people here can help me, i got the dreaded yellow sticker the other day and it requires i get a RWC and then take it to VicRoads to get removed. Now im more than a little worried about goin for a RWC and here is why, well first off the list of nedded attention that was wrfiten on the sheet is Tyres, Horn, Park Lamps, Ground Height and Air Filter, now ive fixed these all up already but when i put the standard airbox back on the snorkle thingy wouldnt fit on because the FMIC pipe are in the way, i was told that im not alowed to have the FMIC on by the police and they said i will get a fine from epa in the mail and he didnt write it on the list, but i rang the epa and i was told that you can either have a FMIC or a Pod Filter and not both, which is why i put the stock airbox back on, so does anyone know if it will pass without the air snorkle thing on ??

Anyways i have a BOV and boost controller on and i still have the stock ones in my room so i can just put them back on temporarily and the same with a few other things, But one main thing im worried about is my drivers seat, its a Bride fixed back fiberglass one and i have a harness, its installed properly on bride rails but im not sure if its legal or not and unfortinatly i dont have the original seat to put back in it, i have the normal seat belt that i can put back in but does anyone know if the seat will pass ??

Also does anyone know if they will drive it when i go to get aq RWC for it ?? and will VicRoads drive it also ??

The reason im asking is because i have a screamer pipe on it and i dont reckon they will notice it unless they drive the car, i have the stock dump pipe still but its such a damn pain in the ass to change. Someone here must have had toi take there car to vicroads to get a canary removed b4, did they test drive the car ??

Anyways thats about it, there are quite a few other things but i still have the stock parts to put back on it so im good there. So if anyone can answer any of my questions i would be gratefull.

Thankyou.

Just a quick one, what would be best - EBC Green Yellow or Red Stuff

Link to comment
https://www.sau.com.au/forums/topic/127866-canary-problems/
Share on other sites

ok the air box should pass without snorkal, and ebc greens are better for street not too sure about you seat

tho , carnt really see it being too much of an issur i guess as long as on seat is reclinable . i guess put it all back to stockish and see how you go then.

GOOD LUCK :D

Link to comment
https://www.sau.com.au/forums/topic/127866-canary-problems/#findComment-2363592
Share on other sites

As long as the seat is ADR approved, you'll be right, but you'll have to find out from the manufacturer. Although if it's a fibrglass racing seat, it's probably been stamped with track use only, in which case, put the old seat back in.

Link to comment
https://www.sau.com.au/forums/topic/127866-canary-problems/#findComment-2366668
Share on other sites

Screemer pipes are illegal, as they dont let the exhaust gasses pass through the cat. I am not sure if you will get away with it as Vic Roads are usually switched on to those things as they look out for them. Just might wanna dodgy somthing up to hide the pipe that goes nowhere.

Link to comment
https://www.sau.com.au/forums/topic/127866-canary-problems/#findComment-2367011
Share on other sites

ok cool thanks for the tip, i have the stock pipe so i can put it back on .. Does anyone know if Vic Roads will actually want to drive the car, from what ive been lead to beleive is that they will just give it a quick visual check over to make sure the RWC is good.

Also does anyone know if a Bride seat is ADR approved ?

Link to comment
https://www.sau.com.au/forums/topic/127866-canary-problems/#findComment-2367089
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...