Jump to content
SAU Community

Recommended Posts

from my knowledge of the rule its ok as the pods would be considered 1 intake mod. if you were to change the intercooler that would count as two intake modifications. best to ask vic roads as a lot of their rules are full of grey areas and exceptions

when i spoke to the EPA last about aftermarket front mounts, they said as long as you can prove it is within stock dimesions then its fine. But i couldnt be assed taking off the front bar to measure up the cooler and just used a stock air box instead!

Im sure this has been asked before, but would i get away with a enclosed POD? Legally? Its still a modification but.. not off the shelf, and its roadworthy so.. any ideas?

the pod doesnt have to be enclosed as far as i'm aware (although its useless if exposed to the engine bay anyway)....

As long as its secured to the car, and is the only intake mod, its legal

Someone from EPA mentioned if you have a Pod Filter it has to be the Dry kind not the Oil Soaked ones. Anyone confirm this?

The Reason why I ask is because everytime I ring up I get a different response.

Edited by beefy

what if you have a pod in and enclosed box that you cannot see, and a cooler, what can be done ?

When i called the EPA regarding this i was told only an exposed pod OR a cooler. Unless the car comes with a factory intercooler then you can have a pod as well.

Someone from EPA mentioned if you have a Pod Filter it has to be the Dry kind not the Oil Soaked ones. Anyone confirm this?

The Reason why I ask is because everytime I ring up I get a different response.

Oil Soaked pods are illegal, the dry kind are fine.

what if you have a pod in and enclosed box that you cannot see, and a cooler, what can be done ?

When i called the EPA regarding this i was told only an exposed pod OR a cooler. Unless the car comes with a factory intercooler then you can have a pod as well.

Having a pod, whether it be enclosed or not and a Intercooler thats not stock or is relocated is illegal.

A pod with a stock cooler is legal.

A FMIC and stock airbox is legal.

You could get alway with an enclosed pod if the box looked factory, but its still illegal.

Cheers

Edited by stealth01
  • 3 weeks later...

If that's the case, I need some help. I have actually 'misplaced' my stock air box in my garage (it happens). Can't find it anywhere now. And I have ordered a new FMIC recently. Since I still want my mods to be legal, I want to replace my pod with a stock air box again. Anyone out there willing to sell me their stock air box. I have a R32 GTS-T and I live in the outer east (Knox area).

EPA Mod Rules Extract February 2006

© Intercoolers that are larger than standard or have a different mounting location or are added where none were originally fitted, are permitted only if no other changes to the intake system have been made. In other words, you may have a pod filter or modified/added intercooler, but not both.

Any sensors integral to the original intercooler or intake system must be retrofitted and be in the correct location. Note: aftermarket turbocharging kits that include intercoolers that have been type tested (ADR certified) for the model vehicle are permitted. Documentary proof must be retained to substantiate this.

(b) Dry element pod type air cleaners are permitted on EFI vehicles. Oiled, oil-soaked or fluid-treated elements are not permitted. Any sensors integral to the original system must be retrofitted to the same approximate location.
Variable turbocharger boost valves (‘boost controllers’) or other means of altering boost levels are not permitted unless part of an original manufacturer’s fitment. ‘Blow off’ (‘pop off’) valves must be plumbed back into the system. Atmospheric venting is not permitted. External wastegates are not permitted.
Non-original electronic chips or computers, whether fitted as a direct replacement or in a ‘piggy-back’ configuration, are not permitted to be used in an engine management system unless it can be demonstrated that their installation and use allows the vehicle to meet the appropriate ADR. They must also be sealed or otherwise constructed so as not to be reprogrammable.

So who here can say they do not breah any of the above rules?

With my new setup, me.

Either way, its not a question of who can pass or not.

The rules are there, they are readily accessible.

So next thread about "can i have a pod" gets locked :(

hehehe...i wold have thought most ppl would have aftermarket ECUs and boost controllers... Pods and ICs are visible and hence gain the majority of the attention. Just don't drive like a hoon or be on P plates...The insurance companies don't seem to care much, having made a massive claim with most of these known on their books they still payed out no quetsions asked. I would have thought they would go to town on this stuff, maybe they do sometimes and I was just lucky.

hehehe...i wold have thought most ppl would have aftermarket ECUs and boost controllers... Pods and ICs are visible and hence gain the majority of the attention. Just don't drive like a hoon or be on P plates...The insurance companies don't seem to care much, having made a massive claim with most of these known on their books they still payed out no quetsions asked. I would have thought they would go to town on this stuff, maybe they do sometimes and I was just lucky.

Has anyone experience problems with their insurance companies from their mods?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...