Jump to content
SAU Community

Recommended Posts

Well done :D They mentioned the owner was from Australia too... good on them.

Not really into Kei's but with those 'bargain mods' how much power did it make?

its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

Edited by Hungryhippo
its making 80ps at 0.9bar boost.end of next month ill be fitting a bigger turbo which will give me around 100ps at 0.9bar.tossing up wether to get forged pistons too so i can run around 1.4 bar boost.at the moment its got massive midrange torque and great throttle response,the bigger turbo will shift all the power to the top end.4500ish to 8000rpm. The mechanic did a really good job tuning the E-manage.very smooth and very good response.a lot of the other kei tuners just go for maximum power but the response is very bad.

Rezz - i think you might have misread the articles title.Its "batsugun" not bargain

lol yeah misread it... :happy: stupid mistake.

I'm wondering what that Suzuki Cappucino was running to hit 242km/h (can't remember who modified it)? I've heard someone getting 200+hp from an F6A... doesn't sound like much but I can only imagine what it would be like to drive.

the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :happy:

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

Edited by Hungryhippo
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc :yes:

If he can get 300ps thats gotta be up there as one of the most powerful F6A's yeah? Gotta remind people reading this thread that 760cc refers to engine capacity not injector size :happy:

thats what hes shooting for.hes using the old k6a.the newer one like the one in my car with individual coil packs doesnt seem as good for insane power levels.its better suited for street use,much wider spread of power but not so much topend. 250 is the absolute max he can get from 660cc so hes upping it to 760cc

Edited by Hungryhippo

its a year old.shakken in 2 years.the e-manage will be ok.one of his customers even got his car passed without a cat.they really dont care about keis here when it comes to regulations.it only costs 30 000yen for shakken but from what ive heard its around 100 000 yen for a normal car.i also dont have a cat but fingers crossed i wont have to put the cat back on.

Yeah shaken for my HCR32 was around 100,000yen. Ever driven a Honda Z? I know they look more like a mini 4WD, but Honda factory turbo does have a ring to it... I've never seen any modded examples around, just the odd one in traffic.

Like I said I've never really been into Kei's, even after 5+ years in Japan never really bothered to check them out... although I did borrow a friends AT Suzuki Wagon R RR (with BOV) for a couple of days lol... but this has been pretty interesting. Thanks for the insight :cheers:

nah.only driven suzuki kei cars.alto and cappuccino.oh man, u drove a wagonr rr auto?????ouch.

ive always liked little cars.and with the price of petrol now im kinda glad ive got a kei.even bouncing off the rev limiter in the mountains for a few hours i get around 11 litres/100kms.

  • 4 weeks later...
  • 4 weeks later...
the mechanic that did my car has an alto with 250ps at 12000rpm.he's just developed a forged crankshaft and hes gonna try for 300 ps from 760cc smile.gif

most of the race prepped keis here get around 150-200ps from either the f6a or k6a.

u no where i can get more info on his car :D ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
×
×
  • Create New...