Jump to content
SAU Community

Recommended Posts

Damn, that seems like such a little thing but I swear it's exactly the kind of little thing that would give me the shits after weeks of use.

Ditto :)

Do you have the same prob with the justjap one Richard?

Ditto :)

Do you have the same prob with the justjap one Richard?

yeah, it probably extends the wheel towards you (and away from the idicator stalk) about 80mm all up. doesn't really bother me. But it means you will have to take your hand off the wheel to indicate.

I got one mainly for the fact that it brings the wheel closer and I don't have to have my legs crouched under the steering wheel column to get a decent reach.

The horn has contact switches on the both parts of the lock kit.

I can't notice any play in the wheel although the quality doesn't seem to be 100% as it is a little rough in the finishes, but nothing structually

wrong with it. Check them out on ebay, they are made bt D1 spec and I got mine for about $70 (from just jap on ebay)

do these have provision for the horn button wiring?

Yes. It's a complicated system of brass fittings and contact points.... lol

Seriously it's just like an 'extention' of the same thing they use on aftermarket horn buttons.

yeah, it probably extends the wheel towards you (and away from the idicator stalk) about 80mm all up. doesn't really bother me. But it means you will have to take your hand off the wheel to indicate.

I've sat in a car with one of these before. I can reach the indicator stalk fine, but I have crazy long fingers.

TRUE

Get the misses to hold it :P

Ha ha, yeah that's what handbags are for! But if you were at someone's place you could always take it inside. If you were at a shopping centre you could probably hide it underneath the carpet in the boot that covers the spare wheel. It's a bit of an extra hassle though.

I bought a chargespeed quick release system which has a ball type lock and its very tight...there is almost no play what so ever. I did however buy a D1 version initially but i returned it for the chargespeed as it had quite a bit of play and moved around way to much for my liking... just my 2 cents.

look, there is nothing majorly wrong with the just jap ones. think about it. a 'proper' splined one costs around $350. a just jap one costs under $100. So it's a bit unreasonable to expect it to be perfect. With the ball lock there will always be a tiny bit of play. other than that they are fine. the fact they move the wheel 10cm back is a given, every brand does that. like I said I have 3 (but I've also bought another one for a mate). 2 of the 3 have seen track use, and 1 of the 3 has been used for probably 200laps at 5 race meets + practice days in 12 months. it's not as tight as it was, but it hasn't let us down in any way either. and it means I can get into the seat without having to swan dive through the opening in the roll cage.

key points:

* yes you will need an aftermarket wheel AND boss kit (so if you want to keep factory wheel, or have an airbag wheel, it's not for you)

* yes it spaces the steering wheel further towards you (so most likely you will need to take your hand off the wheel slightly to use indicators)

* yes it's most likely illegal for street use (but so is probably 3/4 of your aftermarket parts)

* yes if you can afford it one with a spline system is better (but more than 3 times the price)

* BUT, if it's what you want the just jap ones cannot be beaten for value for money. I would not have bought 3 more after the first one if they were sh1t.

here endeth the lesson!

I was under the impression it was legal to remove an airbag wheel if the airbag was optional in the first place?

Im sure i read that on boostcruising forums one day....

no. If a car was factory fitted with an air-bag wheel, it cannot be replaced with a non-airbag wheel.

  • 2 months later...

I spoke to the RTA on this, and if the airbag was an option or if the car continues to comply with ADRs (for padding and size etc) after the removal it is legal in NSW, i have a GTR and they said it is legal for me to remove the wheel in it and swap it for a non airbag one

  • 4 weeks later...

if your car was delivered from factory (option or standard equipment) you cannot replace it with a non air bag wheel. i have a series 1 r33. while airbag was an option my car was not ever fitted with one. i can fit a tennis racket if i like.

as long as its the right diameter and all that lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...