Jump to content
SAU Community

Recommended Posts

I've used Tech wax. Its not bad but because it has minor abrasives in it, there is little point using more than 2 layers because you'll just be rubbing off the previous one. You'll definitely need to prep the car first before using tech wax. Something with a mild polish like Meg's ColorX would do the job nicely!

Im with Nate31. That zamol stuff is nice gear hey. Bloody exxy tho, the top of the line stuff is $13k (yes $13 000, but free refils for life). Look on their website for the stockest of it. Most of their gear is natural product.

The clay works awesome. You can see the grim on the clay. Once your done you can run your hand over it with your finger nails and feel how much smoother it is. I really is a MUST if your doing it properly. Makes a massive difference.

Waxed my R32 today :)

Used a single coat of Meguiars Yellow Tech Wax and left it in the sun whilst I vacuumed the car. Buffed it out with a orbital buffer and got all the little bits with a microfibre cloth.

When I first got the car it had heaps of swirls. I washed, clayed and washed again. I went around a few times with the orbital buffer and some megs fine cut cleaner #2. Then I did the tech wax. Came up perfect for 13 year old paint. I just need some touch up paint to get rid of all the stone chips and scratches now.

Megs Crystal polymer sealant is also decent substitute for the Tech Wax if you not into waxing your car every month. Shine isn't as great but it lasts for ages. I used it on my parents cars and they came up great after a cut and polish. They still look clean after 3 weeks now.

Photo was taken with my phone so excuse the quality

post-28866-1154686313.jpg

All this talk about claying, I thought i'd give it a shot tonight. So off to Motoquipe and $40 later, i had the Meguires Quik Clay pack.

Man that stuff works a treat... the amount of gunk that was on my bonnet surprised me. I also used it to remove the usual japanese pollutants off my window.

Highly recommended.

So after you clay, what do you puy on next Nate?

(writing my shopping list..lol)

It should go something like -

Wash with degreaser/detergent (to remove wax/polish)

Claybar

Wash again

Polish (with swirl remover if needed)

Wax or Sealant

u guys do relise that wax is bad to use on ur car, if u ever need a respray or are plannin on getting one, wen u rub it bac an try an paint over it the paint doesnt like sticking, trust me my dads a panelbeater an it happend to my vl.

there for no wax for me.

u guys do relise that wax is bad to use on ur car, if u ever need a respray or are plannin on getting one, wen u rub it bac an try an paint over it the paint doesnt like sticking, trust me my dads a panelbeater an it happend to my vl.

there for no wax for me.

If the repairer cant remove the wax they havent prepped enough (their problem not mine)

Polymer finishes are usually worse than wax as they can penetrate deeper into the paint (agin a good prep will fix this)

If the painter cant get the wax out of the paint, ask them to take it back to metal.

hey pals, abit off topic but what orbital buffers do you use?

i was thinking about just buying a shitty gmc orbital buffer and some good quality microfirbre buffing cloths.

will this do or should i save and buy a better quality buffer?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...