Jump to content
SAU Community

Recommended Posts

Here you go guys

Oh, and Nismo Boy, how about you look at how everyone else has provided their VIN and supply me with the correct format - I can't FAST the numbers you have provided. Engine numbers and model numbers are no good.

post-669-1250082022_thumb.jpg

post-669-1250082035_thumb.jpg

Hey guys - First post here! Sorry to not give a proper introduction but this request is very urgent :)

Looking at a 180SX at the moment - bit of an epic saga that started in June.

VIN: 6U9000RPS13324593

Engine Number: SR20848988A

Thanks a bunch in advance~ :mrt:

*Corrected VIN number

Edited by Rundle32
Here you go guys

Oh, and Nismo Boy, how about you look at how everyone else has provided their VIN and supply me with the correct format - I can't FAST the numbers you have provided. Engine numbers and model numbers are no good.

Why i posted the Aussie VIN is past my own common sense, sorry. Here is the correct one I hope.

HCR32-284478

More important than the photo would be looking at the factory build plate rather than the Australian compliance plate. Remember, the FAST system is a Nissan product and has absolutely nothing to do with the local bureaucracy. But in your case, you might want to look your car up on the RAWS site to see what that says too.

The VIN is 6T91MPAAAT1GVT001

I searched through one website and it said it was a blue 33. Which it is. But then it asked to pay so i said pffftttt. Tried searching through other sites and it says that it can't find it.

hey guys i got no idea what happens here but im buyin a r33 gtr not sure if its a vspec could sum1 please help and just anyother general info would be awesome.

BCNR33022988

GGPRQFR33ZDA A AA

the second one is the body num dont know if thats needed, thought id put it neways.

cheers.

The first one is the body number, and the second is the model code. That is the EXACT information that we need in order to look up the car. Others take note!

:D

(But I'm not on a PC with FAST right now, so I can't actually look it up - I'll try to do it later on tonight)

:thumbsup:

you're welcome - but I have no idea how to tell if it is a VSpec or has options - most of the program is in Japanese. Someone else might be able to tell if it is a VSpec from the screenie I posted though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...