Jump to content
SAU Community

Recommended Posts

Ian

Sorry Bro but doesn't seen to be VSpec, should say GTR/V not GTR

cheers

10-12-10.jpg

post-68505-0-82011900-1291904668_thumb.jpg

Ouch, thanks Bundy Bear. I put down a deposit on it thinking it was a V SPEC, the speedo cluster is from a vspec with the active lsd light and the compressed tacho numbers.

Trouble is it can't be the original speedo so who knows what the real kms would be. Guess I had better try and get my deposit back.

The vin they gave me over the phone bnr34 005515 isn't correct. Just looked at a copy of the export certificate before I was going to ring and try and get my deposit back and saw the correct vin bnr34 005155. Could someone please fast the correct vin for me. Thanks

vin BNR34 005155

Could someone please run this for me

BNR34-402618

Just bought this but no idea if its a Vspec or Normal Thanks!

Sorry Mate

Mine won't accept that VIN (SOMETIMES happent with FAST)

If no one else's works then you best bet is to decode the model number or look at the options fitted to 34 Vspecs n compare yours

Easiest way to tell if its a VSpec is the $$$. if its cheap(ish) then probably not

cheers

Bundy

preety sure that:-

The 6th letter of your model no signifies Vspec or not

V = Normal GTR

W= GTR Vspec/VspecII

If the 16 th digit is an "I" then youve got an N1

note: the number you supplied is the 'VIN' number. The 'Model" number is on both compliance plates( along with most info FAST will supply + more)

Cheers

Bundy

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...