Jump to content
SAU Community

Recommended Posts

:P i'm looking to maybe sell my hks turbo kit which is on its way to australia from japan now.

the kit consists of: hks ballbearing 28/30 (or35 mabe lol) turbo sitting on a topmount exzorst manifold, with HKS external wastegate(with 3 springs for different boost pressure) with screamer pipe. i also have the custom made dump-pipe made for this topmount turbokit. the kit also has all oil lines etc. the kit has only done 500km.

i also have hks cams that came with the kit. don't know much about them lol. but hopefully the pics help.

$3500 or nearest offer for the whole lot.

post-11080-1154502845.jpg

post-11080-1154502981.jpg

post-11080-1154503043.jpg

post-11080-1154503080.jpg

post-11080-1154588515.jpg

post-11080-1154588587.jpg

post-11080-1154588663.jpg

post-11080-1154588782.jpg

Edited by IMPORT-G

with the hks cams

could be interested in them

jsut depends how much you were wanting for them

i can give ya 300 to start off with price for the cams

but you have to work out yourself how much ya want for them

Post a price or the thread will be closed.

Im confused, you are trying to sell a kit that you are unsure of the value on and you cant confirm exactly what you are selling? That seems strange.

Really need to know what cams they are?

Are they for VVT or not.... what is the lift?

Part no.s perhaps hehehe....If they are the cams I'm after I would be willing to pay $400

HKS cams in Aust brand new at $826 a set these are second hand, and you don't not how worn these are...

Roy: the hks GT badge still has its protective sticker on>wouldn't you think if this kit was thrashed this sticker would have peeled off from the heat?

the kit has onlydone 500km, i know the owner in japan. he had this on his r33 but got rid of the whole whole engine for a RB26 for more power.

i also have the whole exzorst from this turbo kit. its ABFLUG

Edited by IMPORT-G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...