Jump to content
SAU Community

Recommended Posts

Finally got my compliance plate and registration yesterday.

Been driving non stop since then and the car hasnt let me down. ...Everthing I had hoped for.

Used the Maguires products today and shes come up a treat.

First used soft gel wash

then paint cleaner

then water finish polish

..and will wax it tomorrow

is this the right way to do it? Maguires have got so many products that seem to do similar things.

Was hoping to see some of you tonight so I could have a run. Drove everywhere and couldnt find anyone willing to have a bit of fun.

Be seeing ya

says the one in the very shiny clean polished R33

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/
Share on other sites

am certainly loving it.

Car is a stocker but good things come to those who wait. Im a bit worried about my license though. Its such a smooth and quiet (stock exhaust) car that u dont even realise hoe fast your going. I only have 3 point left and crossing my fingers.

Will post some pics soon (after I wax it)

There IS a question in my first post!

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-241750
Share on other sites

No way that is completely wrong the way you have washed it! you haven't given meguirs enough money that way you need to buy the following and place on in the folowing way

1. shampoo that is a nice yellow colour that gets rid of air of the paint

2. a different class 2 type that gets rid of any left over air from the paint incase you didn't get it off from the 1st wash

3 class 3 air off paint remover

4 car shampoo & wash

5 car shampoo and wash cleaner

6. car shampoo and wash cleaner cleaner

OK honestly i think meguirs is a VERY good product but i really think they have gone over board in there range and are hopping for people like us who car dearly about our cars to buy everyone of their products this i think is all that you need!

1. First used soft gel wash

(2. deep cut polish or swirl remover if your car needs it)

3. finish with Gold class wax/polish

these are the only 3 products i have been using for the past 1. 5 years and works a treat... anything else really is overdoing it. Even my friend who details porsches told me the same!

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-242144
Share on other sites

My car sometimes after starting seems to idle eratically for a few seconds before idling normally.

Does anyone know what might cause this?

ALso how many ks do you guys get out of a full tank when driving at a medium to hard level?. Probab only been getting about 250-300 myself

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-243818
Share on other sites

I dont drive my car hard 100% of the time on average I get 450-500km's out of a tank. I generally change gears at 3000rpm around 90% of the time, whilst 7% is around 5000rpm and the rest around 6500rpm. If you only got 350km's out of a 60l tank, I'd suggest you have been floggin it far too hard, back off or you will do some damage, especially if the car was complianced with cheap oil also are you using BP ultimate98?. I get the same rev problem when starting the car, happens maybe once a fortnight... dunno what it is, could be something to do with the AFM.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-243900
Share on other sites

Originally posted by rob77

I dont drive my car hard 100% of the time on average I get 450-500km's out of a tank. I generally change gears at 3000rpm around 90% of the time, whilst 7% is around 5000rpm and the rest around 6500rpm. If you only got 350km's out of a 60l tank, I'd suggest you have been floggin it far too hard, back off or you will do some damage, especially if the car was complianced with cheap oil also are you using BP ultimate98?. I get the same rev problem when starting the car, happens maybe once a fortnight... dunno what it is, could be something to do with the AFM.

whats the point in having a turbo if your going to be changing gears at 3000RPM.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244503
Share on other sites

ImPrOvIsE, if i drive, and shift at mostly 3000rpm - 4500rpm i'd probably get around 400km out of a tank, depends if you're driving on boost a lot too, be a lot different if you accelerate softly up to 5000rpm without generating much boost, than planting it from low revs to 5k. I have taken it easy for a whole tank before and managed 480km (city driving) and the fuel light had only just come on (sits on E for ages before the fuel light comes on).

paul 6000rpm all the time? how often you change your oil and oil filter?

chris.

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244518
Share on other sites

Originally posted by ImPrOvIsE

whats the point in having a turbo if your going to be changing gears at 3000RPM.

The point is I like to get good milage and prolong the life of my engine and most of my driving is done going to and from work at peak times. The point of having the turbo is that when its late at night and I want to fang it I can. If you wish to drive like a ****nut and change gears *all* the time around 6000+ rpm go for it. Just dont whinge about your poor mileage. I'll ask my questions again, do you use BP Ultimate 98 and what engine oil was put into the car?

Link to comment
https://www.sau.com.au/forums/topic/12887-bout-bloody-time/#findComment-244840
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...