Jump to content
SAU Community

Recommended Posts

hey dudez, just got my car back fromt the dyno shop yesterday

it made 153.6rwkw. happy with that.

mods done so far:

FMIC

Pod

3" turbo back exhaust

turbotech bleed valve @12psi

now the afrs were at 14.1, which is high i know.

i am getting an ecu remap done hopefully this week by dr.drift

now my question is: this will obviously correct my afr reading, yes?

is it wise to get an SAFC-II to monitor all the afrs etc, etc??

thanks for your help in advance

cheers

jabba

cant get my dyno grpah up yet, but will try soon

Link to comment
https://www.sau.com.au/forums/topic/129309-my-dyno-results-and-few-questions/
Share on other sites

14 is very lean. suspect fuel pump on the way out.

dr drift will sort out the afr's. no need for safc.

it wont help you monitor the afrs.

once the tune has been done it will be sweet and afrs should be spot.

it should be near 12 on max load. 14 is too lean on max load

U need a SAFC 2 to richen/lean up a mixture and urs is pretty lean.

I hope 14.1 is at cruise and not a WOT, because its hella lean, should be around 12 AFR, so u may need a SAFC 2 to richen up the mixture

14 is very lean. suspect fuel pump on the way out.

dr drift will sort out the afr's. no need for safc.

it wont help you monitor the afrs.

once the tune has been done it will be sweet and afrs should be spot.

it should be near 12 on max load. 14 is too lean on max load

yeh, ray at re customs told me either an safc2 or dr drift remap

ok, ill probably go with dr drift then

cheers

Just curious as to reasons why he got 20 kilowatts more than me..

I have exactly the same mods as him (and a walbro) and i got only 135kw (was expecing 150 with a 34 turbo next week), would my far lower readings be because of different dyno setup or because of general engine wear? The guy at dr drift told me my engine was fine and my afr's were sweet so.. Just wondering.

Edited by r32 gts-turbo

If thats at wide open throttle then save your money and put a new Bosch 040 fuel pump in there. Dont use a Walmart Walboro, dont use a 2nd hand GTR fuel pump, get something like a 040.

Odds are you will find the A/F are corrected back to the overly rich Jap tune, and you have saved your money because you havent had the remap done or SAFC bought and tuned

yeah remap will get it spot on. should be a lot safer and might get some more midrange into it. if it is in fact 14 on max load you shouldnt be flogging it on the street.

i dont generally flog it anyways

might be going to sams tonite

im sure if he looks at the dyno graph he can see whats wrong

fuel pump is coming very soon

thanks for your help

keep it comming

There is no point getting it tuned with a f**ked fuel pump a chip or SAFC or whatever wont be able to get the fuel in if there is no fuel in the rail.

Discrepancies in power can sometimes be different aged AFM distorting the airflow signal, but mostly due to differnent dyno's.

i said id let sam look at first, then we will decide from there.

im not going to replace a pump if i dont need to.

been thru this shit b4 with ppl (not from here) saying its definatley this and that, when it turns out to be something else, you know what i mean?

nah i understand ash, but i just can go by word of mouth anymore

i know you are very knowledgeable and you know your shit, so im not denying that it could be a fuel pump.

im just going to take it to someone who knows his shit...

thanks ash

jabba

one step ahead of ya lol

i am ringing sam when i finish work to make sure its cool to pop past tonite

ill keep yas posted

not denying its the fuel pump, which it could be, thats why its going to a professional

cheers

just do the fuel pump anyway and/or chnage the fuel filter at least....15 y.o and probably got the orig. fuel filter....filter should only cost u $20 to change - from memory its in a easy spot to change. funny enough it was a job I had planned for the w/e.

ok to everyone that said fuel pump, well done.

you guys are spot on. i never doubted you guys but i just wanted sam to check

its booked in for tonite to get the pump and ecu mod done.

ash, i booked it in for a dyno tune and power run. did the best he could.

happy with the power result, but not happy about the AFR's

so thanks with your help guys, appreciate it

cheers

jabba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...