Jump to content
SAU Community

Recommended Posts

hi peoples...

I've just finished reading an article in the latest "ZOOM" magazine about the datsun 1600 SR20det on gas...

From reading the article it seemed to me there were some serious advantages for a straight gas system in a turbocharged application.

Some of the advantages of using straigh gas (according to the article) are;

*better fuel economy "flat out, insterstate travelling 600km to a 60 litre tank"

*The higher octane level in the gas allowed 35 degrees of timing

*High RON rating which is perfect for high boost engines (with no detenation)

*No need for upgrading injectors, fuel pump, pressure regulators...

He's spun up 228kw at the wheels..

To me this seems like the perfect way to go .. but i'm hesitant as i havn't seen many high performance cars using gas.

Is there any disadvantages ?

Any input would be appreciated. As i would consider it for my rb20det.

Travis

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/
Share on other sites

Probably the biggest disadvantage in a Skyline is you will lose most of your boot space. The tank and equipment also adds a fair bit of weight to the car so with the same power your car will be a little bit slower. But I have seen several turbo drag cars running on gas, I think the most famous is the 11 second street-driven XE Falcon. Not too sure about this "flat out, insterstate travelling 600km to a 60 litre tank" though, I can already do that with my R33.

Aside from the initial cost and extra weight I can't think of too many drawbacks. I think it's not as popular with the weekend driven cars because it takes a lot longer to recoup that initial outlay due to the relatively low amount of km done.

Oh another advantage to it is you never have to worry about getting defected for emissions :D

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244091
Share on other sites

Also, all gas systems use a carby setup, meaning you'll never get perfect mixtures at mid throttle, midload situations.

All the fuel maps on your CPU will not be required...

To have a properly setup hipo gas system you would most likely require some changes to your engine, as per the hotter combstion point above and also I think LPG lacks some of the lubrication qualities that petrol has...

And the weight/space dissadvantage, but you do get very cheap 100 RON+ fuel.

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244349
Share on other sites

I was always under the impression that LPG had a low octane rating. In the 80s somewhere. One of the guys I work with has a LPG converted Falcon and he says he loses a fair bit of power when he switches over. Also, the stock LPG AU Falcon had less power than the petrol one. Can anyone explain this?

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244398
Share on other sites

It's most likely just in the tuning - think about it, the majority of people that convert to LPG are only really interested in the cost savings - not potential power upgrade.

Also just because it's higher octane doesn't automatically mean more power, if you put a higher octance petrol in your car more than likely you won't pick up much, if any extra power. All a higher octane number means is its more resistant to detonating, meaning you can run more aggressive ignition timing and/or more boost, and in turn getting more power.

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244426
Share on other sites

I have heard that you will not get any performance gains if your running a dual fuel system (switchable from petrol to gas) In this method the car is tuned to the two types of fuel therefore compromising performance on either switch.

Running a straight gas setup your car is tuned primarily to gas..

This is only what i've heard..

Travis

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244460
Share on other sites

meteor - I'd say it would have been tuned - I mean a car with optimal A/F ratios is usually more economical. He did it for cost savings, so economy was important.

R31 - Fair enough, If it wasn't tuned for both then I can understand that, but that doesn't explain why the stock AU Falcon on gas (from the factory) makes less power than the petrol model. Surely they would tune it?

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244475
Share on other sites

There are two main reasons why factory cars usually make less fuel on gas. Firstly, they are usually dual fuel which means they can't advance the timing as much, in order to enable it to be run on regular unleaded when needed. The second is that LPG has less energy in it than normal petrol.

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244491
Share on other sites

Originally posted by MIC33R

meteor -  I'd say it would have been tuned - I mean a car with optimal A/F ratios is usually more economical. He did it for cost savings, so economy was important.

A/F ratios are one thing, advancing the timing is another. Also it's possible that the most ecomonical A/F ratios do not provide the best power... But at the end of the day, I doubt it would make that much difference on an NA falcon.

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-244529
Share on other sites

i don't even know whether straight LPG would be possible without some serious fiddling with the inside and outside of the engine??

Isn't the whole idea of a turbo engine you compress the air and fuel a lot more to get better power out of less (cylinder) space ? Does that translate for gas even at all?

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-245461
Share on other sites

Running straight gas could be advantagous as you could lose the the weight of a fuel tank injectors ect, and mount the bottle in the fuel tanks place or run 2 skinny bottles for a 32 thus keeping boot space, the gas jet would need to be mounted before the factory throttle body but after the ic.

boost would help compress the gas more compared to a high pressure fule system with injectors and the gas is already under pressure and compressed in the bottle.

The luberication issues with gas was only with cars running on the old super leaded type fuel wasnt it?

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-245853
Share on other sites

fatz.... 4k on a gas system??

I got quoted $1700 drive in drive out..

so then i gots $2300 to spend on a massive turbo..

then keep up with me :)

damqik GTS-T .. u sound like you know a lot about his issue.. do you know anyone who has done the conversion on an RB series engine? in your personal opinion would you say its worthwhile?

Trav

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-245968
Share on other sites

RED17 a vl (rb30) dosn't have a blow off valve to protect the turbo from backfires a rb20det - rb25det & rb26dett dose backfire's wouldnt be an issue. A backfire on gas would be caused from incorrect tuneing or when changeing from one fuel to the other (duelfuel setup).

R31_GTSX I used to work for a shop (in Nundah Qld) that did lpg conversons.

I have only seen the rb30 motor on gas and some vg30's none of which had any issue's.

Damqik

Link to comment
https://www.sau.com.au/forums/topic/12950-rb20det-on-gas/#findComment-246975
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...