Jump to content
SAU Community

Recommended Posts

hi all

just curious to know whether this turbo would run out of puff when going down the 1/4?

and if anyone with this turbo on their RB20 has taken it down the 1/4,

if so, what times did you get?

i wasnt sure if i should put this in the motorsport section either.... ;)

thanks

chris

Link to comment
https://www.sau.com.au/forums/topic/129570-hks2530/
Share on other sites

In a VL i know of an RB20DET that has run a 12.9.

With the power they make there is no reason why if you have good tyres and clutch you cant run a 12.9 pretty easily...i think if you persevere and choke everything out of it you can get a 12.5 @ 113-114mph (provided you can get your 60ft time down to around 1.7 seconds)

Link to comment
https://www.sau.com.au/forums/topic/129570-hks2530/#findComment-2396402
Share on other sites

The VL was nothing crazy, std RB20 with 5 spd and a 2530.

My setup is peakier then what you would expect a well tuned 2530 to be. I was only running 14psi for my 215rwkws when i ran a 12.9 at 113mph with a 2.3 60ft time.

So with 18psi in a 2530 you would expect 220rwkws and more midrange. With a good launch in the 1.8-2.0 sec range you would expect around a 12.5 at 113-114mph

Link to comment
https://www.sau.com.au/forums/topic/129570-hks2530/#findComment-2396978
Share on other sites

ultimately it is going to come down to how well you can drive as to what time you get. i have a mate with a sigma with a stock sr20 with exhaust and fmic and 15psi boost. he got a 12.56 at 106mph on street tyres, with a 60 foot time of about 1.6). another guy with a sr20 in a gemini got 13.1 at 113mph. if it had been over 1km the gemini would've beaten him, but he got a much better launch.

Link to comment
https://www.sau.com.au/forums/topic/129570-hks2530/#findComment-2397668
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...