Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Its not about how fast you are, its more about finding out what works and what does not. I would suggest as an almost first timer, you would get a lot out of knowing your times then most people.

I will have them on the day. I suggest you try one early in the day and then other towards the end, you should have most of it sorted by then.

hey guys, was good to meet you guys today!

sorry I left early - had other things to do and couldnt be bothered waiting another 2.5 hours for out session

was fun though - need more practice so bring on the next day :rant:

Oh the shame, being brought home on a Skyline trailer :D ,Won't live it down on the zed forum. :D

Just want to say thanks to Pete (Fatz) for his kind offer to transport me home after the Zed dropped a couple of cylinders at the Creek today, much appreciated

Now for major rebuild number two :P .

trailor.jpg

paulfats.jpg

silvia powers

80-90rwkw= a 1.58.23 lap time

on re-treads yea baby

everyone wants a rb30 powered na silvia

total times i was asked if it was turbo = ten

wizard..... always a pleasure to tow a door chock gives me more shit to sling at john

I was about to complain about not enough track time, but I did get about 45 laps, 90 min of driving. Zed's did not have a good day, but that happens. Had lots of fun with faz and the odd HSV. the TRKBCH did her thing all day. Squeezed the best time of the day 1.55.01 with 3 scooners under my belt. It was lot of fun.

See you all at the next one. I think its the 16th Fatz special




  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...