Jump to content
SAU Community

Recommended Posts

Wow, so at the beggining of the Top Gear episode tonight I saw an ad for the Mazda 3 MPS, they claimed 190kw, so I thought I'd look it up.

http://www.mazda.com.au/mazda3mps/

Gotta say, everything about it looked good and its price is good also. It has a great stereo and great dash and really good features, but I had to read through almost every page to find out that its only FWD.

Now, what a waste. Everything seems so good, it has 380nm of torque.... But FWD? Give me a break... What kind of 'sports car' has that much power through the 2 front wheels?

Damn Mazda... what a let down.

C

Link to comment
https://www.sau.com.au/forums/topic/130248-mazda-3-mps-released/
Share on other sites

Yeah me thinks I'd still prefer the XR5 to the MP3 thingy.... what ever you call it! My brother in-law has a XR5 and let em tell ya... they are great fun to drive... responsive... gutsy... and I think i'd prefer the Volvo power plant to the Mazda... but hey, that's just me. :happy:

My flatmate picked his up today, and they are a real scream. I'd take it over the XR5 any day - surprisingly it doesn't torque steer and handles exceptionally. It's just begging to be thrashed (the test car copped it) and the power keeps coming through the rev range.

I couldn't bring myself to sell the R34 for one though :(

There are only 2 mazdas I would ever think about getting....the RX7 (obviously), or if i just want something that cruisey, and wont get me hooked on modifying it, the MX-5 SE (dont know why, but I always liked the look of one - very much like a zippy little toy)

I have heard very good things about the 3 MPS.

Mazda unlike Holden have thought about the torque steer problems associated with high powered fwd cars and have a variable adjusting front diff to stop torque steer like the astra vrx.

Will be taking one for a test drive this weekend and pretending the g friend is going to upgrade her 2005 3 for 1 of these

Those that mentioned the MX5, hell yeah I'd have an mx5, what a cool little track car.

INASNT, yeah I might go and drive one too, then try to convince my wife to let me get rid of our N16 pulsar for one. :)

Astra isnt holdens fault hey.

Id still go the focus, I think it looks better. Really the focus and 3 should be the same car other than the engine as its all ford anyway.

And the alfa was a V6 for crying out loud, its nuts.

Either way I think all these cars could be quite dangerous. If you know how to drive them fine, otherwise look out. Guess its the same with everything tho.

I drove one a few weeks back to the workshop for a suspension engineering upgrade. It was raining in the morning and it was really weird, it doesn't torque steer because it cuts the power (traction control). So I tried to drag off my own Stagea (up to the speed limit) and got destroyed. It had like 10 fwkw, just kept cutting the power to stop the wheelspin. When I modulated the throttle it gots its traction control all in a twist.

It was the same on corner exit, give it a squirt to fire it away from the apex and it did the power cut thing. Waiting ....... waiting........OK lets go now.

If I had one, the traction control would have to go on day 1. Then it might be OK for me, but dangerous in the wrong hands. Power understeer city.

My verdict............needs 4wd.

:) cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...