Jump to content
SAU Community

Recommended Posts

This is the one http://www.ebay.com.au/itm/Nissan-R33-Skyline-Rear-Roof-Spoiler-Drift-Wing-Bobtail-Body-Kit-ECR33-RB25-/350974080474?pt=AU_Car_Parts_Accessories&hash=item51b7af75da

The fitment is ok. I painted it all up and stuff then sikaflexed it to the windscreen, Also taping it as tight as i could to ensure everywhere sikaflex was put was sealed and flush. I left it for about 5 hours with the tape on. It hasnt came off since. Being fibreglass it isnt the perfect measurements, but easy to work it.

May I ask how much for the front lip and where did you get it from?

Looks great!

Its just one of these universal rubber lips haha - http://www.ebay.com.au/itm/Universal-Lip-Kit-Suit-VW-Golf-Mk4-to-Mk7-ez-splitter-Mk5-Mk6-Volkswagen-/291055481269?pt=AU_Car_Parts_Accessories&hash=item43c44231b5

I think it does the job well for $40 :)

My old R33 GTST with RB26DETT

post-39081-0-55622400-1389614245_thumb.jpg

post-39081-0-95179400-1389614281_thumb.jpg

Current Series III GTR (Non VSPEC)

post-39081-0-58829400-1389614331_thumb.jpeg

post-39081-0-63228900-1389614396_thumb.jpeg

post-39081-0-90346800-1389614421_thumb.jpg

post-39081-0-84841700-1389614446_thumb.jpg

Annnnnnnd Roughly how it is now….

post-39081-0-74209000-1389614501_thumb.jpg

post-39081-0-07000700-1389614529_thumb.jpg

Specs of GTR before being pulled apart and semi stripped were;

Standard RB26

Steampipe Manifold

Precision 6262

60mm External Wastegate with 2 inch stainless screamer

ViPec plug in ECU

Siemens 750cc Injectors

External Surge Tank and single 044 with standard pump as lift pump

JJR 100mm thick GTR intercooler

JJR washer bottle/catch can

Bride Zieg III fixed back Driver & Passenger Seat

Defi BF gauges

Nismo Cluster and Triple gauges

JJR Oil filter re locater and 19 row cooler

Exedy Compe D Twin plate clutch

RS*r 3 1/4 inch catback exhaust with high flow cat

At one stage had a PSI parts Carbon rear diffuser

Carbon lip spoiler (GTR wing was removed)

All Alpine type r sound gear and focal sub

HKS HypermaxIII coilovers

18x10.5 + 12 SSR SP1R wheels

<br />Any chance u remember the sellers store?<br />Fitment looks pretty sweet, any issues?

Check back a couple of pages, I got my roof spoiler off ebay too. It was a VivaGarage item and I assume it is the same mold as this one. Fitment wasnt the best and it had to be heated up and played with to get to fit right in the end.

What size and offset are your rims on the gtst mate?

My old R33 GTST with RB26DETT

attachicon.gifECR33 RB26DETT .jpg

attachicon.gifECR33 RB26DETT Work VSKF.jpg

Current Series III GTR (Non VSPEC)

attachicon.gifBCNR33 Castletown Shot.jpeg

attachicon.gifBCNR33 Shot.jpeg

attachicon.gifCage.jpg

attachicon.gifPrecision RB26.jpg

Annnnnnnd Roughly how it is now.

attachicon.gifEngine Out.jpg

attachicon.gifEngine Out Complete.jpg

Specs of GTR before being pulled apart and semi stripped were;

Standard RB26

Steampipe Manifold

Precision 6262

60mm External Wastegate with 2 inch stainless screamer

ViPec plug in ECU

Siemens 750cc Injectors

External Surge Tank and single 044 with standard pump as lift pump

JJR 100mm thick GTR intercooler

JJR washer bottle/catch can

Bride Zieg III fixed back Driver & Passenger Seat

Defi BF gauges

Nismo Cluster and Triple gauges

JJR Oil filter re locater and 19 row cooler

Exedy Compe D Twin plate clutch

RS*r 3 1/4 inch catback exhaust with high flow cat

At one stage had a PSI parts Carbon rear diffuser

Carbon lip spoiler (GTR wing was removed)

All Alpine type r sound gear and focal sub

HKS HypermaxIII coilovers

18x10.5 + 12 SSR SP1R wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...