Jump to content
SAU Community

Recommended Posts

Lovechunks - please avail yourself of the Forum Rules. If you are posting negative comments, do not include business names. Vijay

Hi to anyone who reads this. I just saw a freinds two cars that he had ordered from [name removed] :( To say that they were disapointed would be a masive understatement!

Both cars came in damaged on nearly every panel. One would not even start. Both were heavily modified in all the wrong ways, they were missing parts as well. How they got complianced and registered I don't even want to know.

In the past I have bought in cars of my own and only through a reputabe Auction group or buyer.

I'm not sure these two cars are indicative of all their imports but these cars were definatly NOT sourced from Auction.

I'm surprised they were not crushed in Japan but obviously a Japanese Wrecker maybe? thought he could sell them to some dodgy Australian Asshole for about $500?

So a word of warning, buy at Auction from someone you can trust. If your buying before you see leave a 10% deposit and no more.You have to pay shipping and other duties so why not get a decent car? Don't get taken and end up with a junker.

It really pisses me off to think that my buddy was really excited about his new car then ended up disapointed. He doesnt have enough money to be ripped off on a car. So when some DICK says he can save you a bit of money on an import please think twice :(

Edited by raz0r$harP
Link to comment
https://www.sau.com.au/forums/topic/131402-import/
Share on other sites

Hi to anyone who reads this. I just saw a freinds two cars that he had ordered from ^%$^%& :( To say that they were disapointed would be a masive understatement!

Both cars came in damaged on nearly every panel. One would not even start. Both were modified in all the wrong ways, they were missing parts as well. How they got complianced and registered I don't even want to know.

In the past I have bought in cars of my own and only through a reputabe Auction group or buyer.

I'm not sure these two cars are indicative of all their imports but these cars were definatly NOT sourced from Auction.

I'm surprised they were not crushed in Japan but obviously a Japanese Wrecker maybe? thought he could sell them to some dodgy Australian Asshole for about $500?

So a word of warning, buy at Auction from someone you can trust. If your buying before you see leave a 10% deposit and no more.You have to pay shipping and other duties so why not get a decent car? Don't get taken and end up with a junker.

It really pisses me off to think that my buddy was really excited about his new car then ended up disapointed. He doesnt have enough money to be ripped off on a car. So when some DICK says he can save you a bit of money on an import please think twice :(

Edited by Lovechunks
Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431229
Share on other sites

Looks like you mate was too tight to pay the $250 to get the car mechanically inspected before payment was made. The importer in question doesn’t choose the cars for you, they give you the tools and options to choose what car you want. In the end it was your mate’s decision to choose those 2 cars.

Don’t talk crap about a reputable businesses that help a lot of people out.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431545
Share on other sites

Lol, i didnt pay to have my car inspected, and its fine :D

I chose it, with the importers help, they didnt tell me to buy it.

It ran perfectly the first time i started it before it had been complied, and the only stuff i got done was preventitive maintenance (timing belt, water pump etc) :D

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431551
Share on other sites

I've had to edit the name of the buisness out as per forum rules, sorry. There is nothing more to this story. Some have obviously had good dealings with the company which is great. But having said that you can take the above as a cautionary tale, that not all dealings are perfect, far from it.

The person who bought these cars is a good honest person who picked two cars from $%$#%^'s contacts and was sold lemons. Not every buyer knows what they are doing and he may have been a little nieve but he was shown pictures and given a report on both vehicles while they were in Japan, he then handed over money and got crap!

So a word to the unwise. Be extremly carefull.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431744
Share on other sites

I insinuated that thats how much the car probably cost in Japan to buy from some dodgy dealer. Most cars this bad are crushed in Japan. When the 15 year old import rule came in some enterprising people dicided to keep a lot of bad cars that otherwise would have been crushed. Mx5's Celsior's R32's Rx7 etc. I know of a few that were for sale for around $500-$1000. Really cheap! They were then bought over here and sold for market value which was a decent profit.

The above friend payed very good money for his car and still got a lemon.

Why didnt you research on the business before buying a car??

Why don't you read the post before commenting??

Edited by Lovechunks
Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431781
Share on other sites

huh? what do you mean there's nothing more to the story, there's bugger all you've told us other than the cars were "crap"? What cars are they? What grade were they from auction? how much did they pay in yen? They may have paid bugger all and gotten what they paid for.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2431884
Share on other sites

I have just spoken to a representative from #%^%#$# and am sending them pic's and details from both the cars. They seem eager to sort this mess out as am I. I probably shouldn't say anything else until they have seen what I'm complaining about, he seemed pretty nice on the phone. Will tell you how it turns out.

Link to comment
https://www.sau.com.au/forums/topic/131402-import/#findComment-2432993
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...