Jump to content
SAU Community

Recommended Posts

Just thought I'd pop up a post to counter the inevitable sniping that is happening after our dyno results at Autosalon. The Dyno was run in Shootout Mode which means that all variables and adjustments are locked. 2 other cars (B REAL and Leslie's MX5) ran within 1 or 2% of what they made on SSTs dyno during the week. Bear in mind that figures touted by other tuners for their cars from previous "Salons" were not run in shootout mode and are subject to interpretation.

Jash

Link to comment
https://www.sau.com.au/forums/topic/13143-auto-salon-dyno-results/
Share on other sites

Jash,

I read all the post's in here and I don't think anyone has has a bad thing to say about the result. In fact all of us there were very impressed, even old Jaffey:D

We only have a go at the fact that you can only run 12sec with a 649rwhp car:p

I agree, the dyno results were very close to Steve's dyno and congrats on winning.

See'ya:burnout:

Oh it may not be anyone in here, I just wanted to assure everyone in here that the results were legit, as per usual in Perth there's always someone reckoning we fudged the result.

Hey it was a poorly tuned 500rwhp car when it ran a 12 at 123. something mph :shake: . Will all be fixed with a Holly or some PPG gears and some Nittos.

Jash

Jash,

We know the car should be capable of much more at the plex, and we want to see a GTR take it to some of the V8 brigade.

WE will only bag you if you deserve it:D How much boost were you running, and is there anymore left in the engine at the moment?

See'ya:burnout:

Quite a bit left in it based on how its going now. We just started using VP103 in it and we reckon that there is at least 500rwkw in it. We we're running 1.7 bar which is getting towards the meat of the efficiency for the 3037S. We'll see. Now I've just got to find a Holly sequential for the right money...

Jash

The Dyno was even closer than that, BREAL and MX52NV made within 0.3%.

The runs were in shootout mode and for real.

So that is the highest figure in WA for a GTR and would be 734rwhp at Myaree and upto 800+ on the dynopack and dynojet

dynos. Good on ya Jash for outrite and Paul for the 4cyl crown.

Lets make Shootout mode STD for Shootouts to stop the fudged

figures that DO happen.

Dude,

Ta Dude, nice to meet you all finally - met PVA too.

I'm a sucker for anything with Sparco on it. I also want one of those Superfun Happy baseball bats - I reckon it'd be hilarious to kneecap an intruder with one.

Jash

Amen Hippie,

Shootout Mode is made for a reason and comes with every Dyno Dynamics dyno, if an operator says they havent got it then they are telling porkies. Also worth getting any power runs done in Shootout mode so you can compare with some degree of accuracy.

Jash

Nice work jashy, be nice to see that thing at full boost and power finally, it sat in the shop waiting long enough for it to happen..

bring on the 1k mark and maybe perths first 9 second 4wd pass, might give the eastern states boys something to think about..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...