Jump to content
SAU Community

Recommended Posts

Just thought I'd pop up a post to counter the inevitable sniping that is happening after our dyno results at Autosalon. The Dyno was run in Shootout Mode which means that all variables and adjustments are locked. 2 other cars (B REAL and Leslie's MX5) ran within 1 or 2% of what they made on SSTs dyno during the week. Bear in mind that figures touted by other tuners for their cars from previous "Salons" were not run in shootout mode and are subject to interpretation.

Jash

Link to comment
https://www.sau.com.au/forums/topic/13143-auto-salon-dyno-results/
Share on other sites

Jash,

I read all the post's in here and I don't think anyone has has a bad thing to say about the result. In fact all of us there were very impressed, even old Jaffey:D

We only have a go at the fact that you can only run 12sec with a 649rwhp car:p

I agree, the dyno results were very close to Steve's dyno and congrats on winning.

See'ya:burnout:

Oh it may not be anyone in here, I just wanted to assure everyone in here that the results were legit, as per usual in Perth there's always someone reckoning we fudged the result.

Hey it was a poorly tuned 500rwhp car when it ran a 12 at 123. something mph :shake: . Will all be fixed with a Holly or some PPG gears and some Nittos.

Jash

Jash,

We know the car should be capable of much more at the plex, and we want to see a GTR take it to some of the V8 brigade.

WE will only bag you if you deserve it:D How much boost were you running, and is there anymore left in the engine at the moment?

See'ya:burnout:

Quite a bit left in it based on how its going now. We just started using VP103 in it and we reckon that there is at least 500rwkw in it. We we're running 1.7 bar which is getting towards the meat of the efficiency for the 3037S. We'll see. Now I've just got to find a Holly sequential for the right money...

Jash

The Dyno was even closer than that, BREAL and MX52NV made within 0.3%.

The runs were in shootout mode and for real.

So that is the highest figure in WA for a GTR and would be 734rwhp at Myaree and upto 800+ on the dynopack and dynojet

dynos. Good on ya Jash for outrite and Paul for the 4cyl crown.

Lets make Shootout mode STD for Shootouts to stop the fudged

figures that DO happen.

Dude,

Ta Dude, nice to meet you all finally - met PVA too.

I'm a sucker for anything with Sparco on it. I also want one of those Superfun Happy baseball bats - I reckon it'd be hilarious to kneecap an intruder with one.

Jash

Amen Hippie,

Shootout Mode is made for a reason and comes with every Dyno Dynamics dyno, if an operator says they havent got it then they are telling porkies. Also worth getting any power runs done in Shootout mode so you can compare with some degree of accuracy.

Jash

Nice work jashy, be nice to see that thing at full boost and power finally, it sat in the shop waiting long enough for it to happen..

bring on the 1k mark and maybe perths first 9 second 4wd pass, might give the eastern states boys something to think about..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...