Jump to content
SAU Community

Recommended Posts

they are designing them for the US market, so what they will do is tune them so that they run so rich that they will need a water pump as a fuel pump, since them yanks like big fuel drinking cars.

and notice how they are are only doing the SUVs. i think the yanks rate a car on the following things,

1. which uses the most fuel

2. which is the heaviest

3. which has the worst handling

4. how many lanes it can occupy at once

5. how stupid they look when pimped out.

Yep, I particularly hate the way they bailed out & turned around a company that was rapidly going broke. Personally, I will never forgive them for that.

On the perfromance front Id Rather them go broke than release ship loads of Tiidas into the world

god damn frenchies

Another remarkably eloquent display of xenophobia. Nice work.

Just because the Tiida is yet another third rate povvo pack small car, sold in this instance is by some third rate American slapper, does that make it any worse than the last generation of Pulsars?

The history of Nissan/Datsun is predominantly one of producing what, in all fairness have been remarkably crap cars. There have been some exceptions - the Z's, a few of the 180/200SX/Sylvia line and some Skylines. Most of what ws good was spawned from the 901 project/business plan/call it what you will. It created some brilliant cars, but left the company in an awful state.

Yeah alot of people hear just think about the turbo Skylines and Silvias when they think of Nissan.

They don't think about the CA18E powered 4 door GX Skylines etc that are crap cars too.

Geezuz would you listen to you people? I bet none of you even read the article...

"Nissan's North American division has announced a plan to co-develop a range of vehicles based on existing models with street-style clothing designer, Marc Ecko."

Who cares what they do in North American Nissan dealerships?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...