Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

I was in Belair National Park over the weekend, and up the back it looks like they've recently done up the "Karka" area, pretty damned nice and a good BBQ spot.

It's $7 per car entry but that'd hardly break the bank.

The SAU Vic Club has pretty full calendar (incl. cruises) so it'd have to fit in there.

Also unless we went the whole way, I'm not really sure how good the routes would be from on our half, the GOR only really gets good between Lorne to Apollo Bay, and simply doing the direct highway drive isn't exactly riveting (trust me I've done it a dozen times in the last few years).

There were rumours of a Oz wide "Skyline Muster" earlier in the year, but it didn't gain enough traction, damned shame as I would have gone for sure!

Edit: Could always hookup with some Western Vic people?

They seem to have a couple of events on the horizon: http://www.wvcruiseclub.com/forumdisplay.php?f=63

They seem fairly organised and mature, despite a high percentage of Falcadore drivers, and they have a disclaimer. :D

Edited by Oosh

That would have been awesome! My girlfriend was only saying this the other day that we should get a group and drive interstate. I'd definitely be up for it, even if it's just a small group, possibly Christmas time

6 months notice?!

If we were only going half way to Melb you could do it all in 1 weekend, I'd just need a few weeks / a month, personally.

Sure if it was some big muster you'd need a lot of notice but then I'd drop a LOT of things to be there regardless.

Me and my girlfriend did the Sydney to Adelaide trip in a day. Was a nice drive too, took it in shifts, one drove, one slept. Stopped for a couple drinks/meals on the way as well. As long as you are sensible about it, it's good

6 months notice?!

If we were only going half way to Melb you could do it all in 1 weekend, I'd just need a few weeks / a month, personally.

Sure if it was some big muster you'd need a lot of notice but then I'd drop a LOT of things to be there regardless.

yeah well im not made of money ive been meaning to go to sydney for like 1.5 years and just havnt gotton there my mate would be willing to put a few of us up not sure how big his property is but we could bring tents :O

Vic would be good if you get down on the great ocean road. Need a bit more time that just the weekend to do that maybe.

As for a drive to Sydney, it's not really that exciting. I've done the trip several times in the last 5 years & I never look forward to it.

Only reason I'd wanna head up that way is to head to for something like the Canberra summer-nat's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...