Jump to content
SAU Community

Recommended Posts

Hello all,

I replied in the Apexi PFC FAQ thread as well..

My car is running really rough, the idle is low and its unstably jumping a few rpm while on idle. Can some one help me out here please? I have set the Injectors in the PFC to 74% correction and +0.04 latency but its still no good. :)

Is there something I am missing?

I have never played around with the PFC settings before.

Link to comment
https://www.sau.com.au/forums/topic/132718-installed-600cc-injectors/
Share on other sites

although not entirely the same i installed gtr replacement 550cc injectors in my rb20det. adjusted them on the powerfc and it ran ok but fuelly. idle tracked around a bit but not bad really for a 50% adjustment. a dyno tune fixed it nice.

if you can drive it to a tuner do that. i know where you're coming from on the labour thing

Unforetunately I will have to install the old injectors to be able to drive it, the idle is all over the place :)

What did you adjust in your PFC settings? All the tutorial says to do is adjust the Injetors to 74% and +0.04

  • 3 months later...

well you'll have to get it on a dyno to get it runnin right anyway (i think), so you can either reset the ECU and let it learn to idle, then take it to a tuner for a complete remap, or just take it to a tuner and let him make minor adjustments to the main maps, then maybe mess around with it to try and get it to idle.

im not completely sure on the retuning thing just for bigger injectors, but its just what i'd do

After the injectors problem I installed cam gears and after replacing everything back onto the engine it was running worse.

Took it to a tuner and got it fixed up. My problems were not with the PFC tune that I did myself initially. From what I can see from the tune, the settings are pretty much what I had when testing it. Must have been something about what I did, but I will never know....

Moral, don't do it yourself if your me :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...