Jump to content
SAU Community

Recommended Posts

I have got my hands on the latest release from garrett.

i need a 25mm spacer between the turbo and the manifold,

and i need to fabricate a dump pipe but apart from that everything i had for the gt30 will plumb straight

in. I picked the .82 a/r so i will be very interesting to see the results.

here's a couple of pics. looks good

post-24852-1158053748.jpg

post-24852-1158053839.jpg

Edited by dangerman4
  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

sorry

i just checked and my bad.

8mm is the dump flange bolts.

the t3 base bolts are 10mm.

and yes once it is spaced away from the manifold there is heaps of room.

i will start taking some progress pics when i get home from work.

Is this the internally gated T3 housing that Garrett have been promising all year, and part of last?

What is the used unit beside it? It appears to have a Garrett logo on the compressor housing too.

And most importantly, can you post up the CHRA ID tag number too please?

I'm going to be interested in the progress pics.

cheers

Is this the internally gated T3 housing that Garrett have been promising all year, and part of last?

What is the used unit beside it? It appears to have a Garrett logo on the compressor housing too.

And most importantly, can you post up the CHRA ID tag number too please?

I'm going to be interested in the progress pics.

cheers

Yes very interesting , hope they are available in quantity !

Dale the CHRA number would be the same for any cartridge with the same comp/turbine so its the complete assembly or unit number you want . Something worth noting is the part number stamped on the side of the exhaust housings mounting flange in the second shot . This would almost certainly be the turbine housings part number .

What I want to know is can these housings be grafted onto the GT37R cartridges because they have the potential to be better than the GT3540R cartridge for the larger/est RB - just need a suitable exhaust housing .

Cheers A .

Edited by discopotato03
Awesome news!!!!

Out of curiosity.... :(

Do they have a .63 internal gate gt3540?

Hi all , I got to look at a couple of these this afternoon - yep .63 and .82AR ratio .

The Garrett part numbers for the housings themselves (according to the packaging) is 771300-5 for the .82 and 771300-6 for the .63 .

The waste gate flat valve looks to be the same size as the IW GT28 housings and there is room for a larger disc as well . Doing a "high flow" on this valve is common practise on souped up XR6T's so no reason why these could not be modified the same way . BUT - always that but - the greater the area of the disc the more area exhaust manifold gasses under pressure have to work on to try and force it open . I kid you not and don't laugh , I've seen people using what looked like old bed springs trying to keep this valve shut .

The rule is if you run high boost pressure do everything you can to have the exhaust manifold pressure down somewhere near inlet manifold pressure . You don't need massive exhaust manifold pressure to drive the turbine just sufficient gas velocity by thermal expansion .

Back to those housings , Brett at GCG has I think five of each AR size ATM so be quick if you need one soon . Had I been better organised I would have had some pics but no doubt they'll turn up .

Cheers Adrian .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...