Jump to content
SAU Community

Recommended Posts

I have just ordered some WORK XD9's which are 18 x 9 in size, with a +20 offset.

If possible, I want to run 265's all round.

Does anyone know if 265's with that offset will cause me problems on an R32 GTR?

I know that 265's are wide for a 9 inch rim, but will it effect the handling a noticible amount?

Thanks

Tim.

Link to comment
https://www.sau.com.au/forums/topic/134350-265s-on-a-9-inch-rim-for-r32-gtr/
Share on other sites

I have just ordered some WORK XD9's which are 18 x 9 in size, with a +20 offset.

If possible, I want to run 265's all round.

Does anyone know if 265's with that offset will cause me problems on an R32 GTR?

I know that 265's are wide for a 9 inch rim, but will it effect the handling a noticible amount?

Thanks

Tim.

You can even go to a 275 depending on the brand you're using. Just do the homework and check the manufacturers tyre specs you may be surprised.

Do not run more than 255 on 9 inch rims for the GTR32.

There might be some issues with the front tyres rubbing on the guards at full lock.

Also you will have better cornering with 255 tyres and you won't be hit by the higher price tags.

Did you get the gunmetal?...I have them (18 by 10 )on my GTR33 here is a pic.

post-29124-1158234095.jpg

Thanks for the replies.

Ronin 09 ...... So you have those wheels fitted to an R32? Do they rub on the front guards at full lock? What is the offset for R34 GTR wheels?

700HP-GTR33 ....... I got the Bronze ones. Get them tomorrow. Now just got that difficult tyre choice.

i have a set of 265s on my 18x9, they are baggy and feel a bit slow to react when turning... i'd stick with 245 or 255.... you'll get better handling, and in a GTR you don't need the grip of that extra 10mm, because you have 4wd.

All GTR Rims are offset correctly for all GTR's so asking about offsets aint gonna do you no good.

The trouble with a GTR32 is the width at the front needs to be the same as the width at the back ,so,

even if you can run wider tyres at the back you are not able to run them at the front.

That is if you want to keep your front guards standard.

:)

I was also under the impression that all 4 tyres on a GTR need to be the same width in order to keep the attessa system happy. If not, I would run 265's on the rear and 255 up front.

I could get both front and rear in 35 series so that the rolling diameter stays the same.

Can anyone else confirm ?

Thanks

Tim.

Tim, if you change the width and keep the profile the same the rolling diameter changes too... see the 'section' (height) of the tyre is a percentage measure of the width, so:

265/35 has a height of 92.75mm

255/35 has a height of 89.25mm

cheers

Ive heard this before, why do the front and rears need to be the same width, i would have thought as long as the rolling diameter is the same, you could run different widths ie: 245/40(f) and 275/35®

That's right, but best way to keep exactly the same rolling diameter is to use exactly the same sized tyres...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...