Jump to content
SAU Community

Recommended Posts

Hi everyone,

Tried a search first and looked through the stickies but didnt find what I needed.

I need the part numbers for:

1. R32 GTR speed sender

2. R33 GTST clutch slave cylinder,push type.

Also, would like someone to tell me which Nissan spare parts departments are import savvy and may even have some import parts in stock.

Tried Werribee Nissan and was granted with stunned silence over the phone soon as the words R33 and GTR were mentioned.

Thanks in advance

Jayson.......

Link to comment
https://www.sau.com.au/forums/topic/135230-part-numbers-required/
Share on other sites

Try 'Nitton' at city Nissan spareparts.. he's really good, very helpful and knows what he's talking about and he knows a fair bit about 'lines anyway.

Try asking someone in the Nissan FAST thread if noone helps you here for those part numbers alternatively.. I can't look them up for you atm, ask me tomorrow if you've had no luck :)

If you have trouble with city nissan

Call Trevor @ Brighton Nissan (spare parts), he helped me with many MANY parts over the years now and knows whats going on and if he has stuff in the country :)

Lots of surrounding workshops use them aswell.

Have you posted in WTB for a sender?

Nissan want a lot of $$$ for em i think.

i use camberwell nissan

service department is extremely cluey about imports, especially about lines.

mechanics own skylines and other nissan imports

did a good job on my car

parts department is ok. they dont like looking up imports, but they still do a great job

i know about looking up import parts (i work at toyota) they are pains in the asses.

anyways, hope that helps.

also used werribee nissan when i was located in that area, they were uselss.

30620-21U23

slave ('operating') cylinder for R33 GTST

Is there another term for a speed sender? Not having much luck finding it.. looked through a few gearbox sections with no luck.

OK speedometer pinion is 32703-05U20 for 32gtr

pinion sleeve is 32707-02G00 for 32gtr

Deleted screenshot caus I sent them to you, if anyone else wants the sections just PM me cheers

We have a trade account at Nissan Spares down in Hallam. Great blokes and they know their imports well (and also what local alternatives can be used).

You can use a Nissan Navara speed sender with an R32 GTS, so it might work with the GTR, as long as its the same cog pattern.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
    • Hey guys. New here. I am having an issue with my hr34. The fuel pump isn't turning on. I removed it from the tank. Bench test it. Wasn't working. Order new one and installed it today. Still not turning on. Checked the relay. Relay has voltage on the contact side. I jumped it and it tuned the pump on. Which lead me to checked the coil voltage.  Turned on the ignition and had my meter across the coil and there wasn't any dc voltage. Had my meter lead on the positive and I used the frame ground and noticed there was 12 volts. Which lead me to believe the relay isn't getting a negative signal. I traced the wire ( black with pink strip).it goes back to the bottom on the steering and it gets lost into the harness.   I checked at the ecm and I can't seem to find that wire color.   My question if any one knows is. Can I not just run the negative through a ignition relay to turn on the fuel pump relay?. Or anyone ever had this issue and if so how did u go about fixing it.    
    • So many people don't notice it, as batteries decay slowly over time. Two big reasons people end up noticing and needing to replace batteries: 1) The cold weather. The cold not only makes it harder to turn the engine for a few reasons, but it also increases the batteries internal resistance. So this means you need MORE power to turn a colder engine, AND the battery has a lower limit on how much current it can provide. 2) Something gets modified/altered/added in the wiring, typically an aftermarket accessory, like a dash camera, or an alarm etc, and this adds a small amount extra onto the battery, and pushes it over the edge in its failing days. But if you hadn't have read this thread, and just pushed through, chances are you might have made it through this winter, just. But come next winter, it would have been kapoot. But the fact you changed it out now, means you've instantly noticed how much nicer it is for starting, and will be less worry for you that the engine won't start now.
    • Holy shit, I'm glad you brought up the battery issue and I'm glad I asked about measuring it. Old battery was at a healthy 12.82V in the morning with the car turned off. Removed the fuel pump fuse, clamped the multimeter on at min/max/average and cranked for ~3 seconds. It dropped down to 8.30V. So yeah, not surprising it struggled that much. Picked up a fresh battery from supercheap and it's ridiculous. Haven't done a cold start yet, but man, even with a warm start the difference is night and day. I can't believe I lived with this for so long. Just blamed it on it being an old modified car. Went with Century because convenient. If they are shit it'll be a future me problem. But just in case I set up a reminder for 30 months - 8 weeks to check on the battery state and get a warranty replacement if necessary. 
×
×
  • Create New...