Jump to content
SAU Community

Recommended Posts

I ran my car at a street meet at Adelaide International Raceway Saturday night (6/4/03), I only did 3 passes launching at 6500rpm each time. The clutch never slipped but driving home it stank to high heaven, and stayed that way until today (Monday). I assume that any clutch will probably give off a bit of a smell if the car is launched hard, doesn't necessarily mean it is screwed.

32godzilla - I ran my car on Friday night at a Melbourne street meet (Calder Park) and my clutch was slipping quite a bit after the third run. Launching it at about 5500 - 6000rpm each time.

Also my clutch still smells today too, funny thing is though it smells a lot once u start the car up even when its stationary, but once you turn it off its ok.

Ethan_R32, I ran a 12.588 at 109MPH. I have a super ARC induction box (which I want to change), and a 3 inch exhaust.

I ran 1.1bar that night but normally putter around on 1bar to try and save the turbos! Have you run any times yet?

hey guys i had the same experience. i have fried 2 clutches and have recently put in a hks twin plate. not good unless it's a track car. there's no play in the clutch. it just bites n launches so u either jump off or ur engine dies.

anyways, 1st time was when i tried to ride the clutch doing a launch and the clutch kept on burning for days until it just gave up.

after that i put in a modified clutch plate which also died when i "fanned" the clutch after a s**t launch, something i used to do in n.a. cars to get it to pick up but not advisable for turbos.

but anyways, what i heard is that if the clutch has been burnt it's not going to work the same anymore. it's just always gonna keep burning till it dies so i'd change that clutch before u get stranded on the highway.

32godzilla, nah havent ran any times as yet. With 240rwkw and a good launch im hoping for low 12's maybe even into the 11's???

rb26dett: well ive dumped it about 3 times at around 6500rpm, and it only smelt once a little bit.

It still feels the same as it did before.

I took it into a tuning place today aswell, and the bloke pressed the clutch in, and reckons its a bit harder that a stock one, so maybe its not stock??? It hasnt slipped at all with the power its got. Who knows.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...