Jump to content
SAU Community

Recommended Posts

here's why :dry:

ok here's the problem! fitting injectors into my CEFIRO, gtr supposed to be direct fit into rb20det! it appears the connectors are different from cefiro to skyline !

cefiro injector

post-9092-1159414165.jpg

gtr injector

post-9092-1159414180.jpg

(can notice that the two little align thing is different - one centred and one to the left ! )

got injectors all fitted in - and the clips on the connectors are different!!!

HELP with the solution - source a 32 loom and take just the connector ends off and solder onto my loom??? i'm thinking this will be the best option.

any insight - anyone else had this trouble???

NEED ASAP PEOPLES!!!! I have G1 drift in 1 week - and still need afm fitted / ecu to arrive and fit / finalise injector fit & tune!!!

BIG THANKS!

Link to comment
https://www.sau.com.au/forums/topic/136397-help-urgent-sa/
Share on other sites

GTR injectors are never a direct fit in to any R32 GTST, the lug has to always be trimmed off OR do what I and many others have done; purchased new injector plugs from motortraders.

If you wish to trim the lug grab a decent stanley knife blade and sit there for a whole day skimming that hard plastic until the lug is no longer. >_<

They sell them in sets of 2 and from memory all up are ~$48, thats $16 per pair.

The GTR VL injector plugs are the same so thats what you are after. They should have them in stock so take an injector down to be sure.

Link to comment
https://www.sau.com.au/forums/topic/136397-help-urgent-sa/#findComment-2536604
Share on other sites

Check out your inj. boots and make sure there not cracked.

If so grab a tube of dialectic grease and cover the contacts inside the plug. This will prevent water running down the crack and corroding the connection.

A few of mine had done this, the main reason I decided to go a new set of plugs.

Link to comment
https://www.sau.com.au/forums/topic/136397-help-urgent-sa/#findComment-2541441
Share on other sites

hud - try petro ject..near alma hotel.look em up

prob lookin at 20$ a plug..

expensive for a six banger, but theyre quality shit.

otherwise resort to the ol solder iron and spades and dont run plugs.

or otherwise u-pull it is your freind..

- i ended up rippin a entire loom with plugs off a mazda2 to suit my sr 550sards.

take it ease..

Link to comment
https://www.sau.com.au/forums/topic/136397-help-urgent-sa/#findComment-2546522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...