Z32 Afm On Rb26

[slw32]

Ive just got a couple of z32 afm's for my gtr and when i went to change them over the plug doesnt fit. is it a matter of undoing the 4 screws and changing the plug over or do i need to do something else? probably a dumb question but any help would be greatly appreciated!

[Abo Bob]

You need the right plugs then you need to wire them in.

[slw32]

You need the right plugs then you need to wire them in.

Thanks but where do i get the right plugs from??

[slw32]

Someone must be able to help me? All i really need to know is how do i get my new z32 afm's to work on my car?

[djr81]

You need the plugs that match the air flow meters & then youneed to splice them into the rest of the cars wiring.

[paulr33]

any local holden wreckers

vl airflow meter plug is the same

http://paulr33.skylinesaustralia.com/

-> diagrams

-> Nissan OEM Airflow Wiring Diagrams

[Blitz]

Someone must be able to help me? All i really need to know is how do i get my new z32 afm's to work on my car?

I bought my genuine Tomei Z32 AFM plugs from Just Jap - They usually have heaps in stock

http://www.justjap.com/parts_nengine.htm

Hope this helps

[paulr33]

also the pods, afm piping and turbo duct wont mate up, not sure if u knew or not

[djr81]

so get some of these...

[slw32]

Thanks fellas the help is appreciated! Paulr33 your site is a great help for the wiring, thanx heaps!!

[paulr33]

yeah the apexi 80mm kit is an option for gtr users who want to switch to z32s but as most gtr owners would realise switching from stock afms to z32s is a costly exercise. almost $800 easily.

z32s - $350 each new

80mm pods - $90 - $120 each

afm to pod piping - $200 odd

silicon joiners - turbo duct to 80mm - $100 maybe???

do most retain the stock turbo ducts and then use joiners or replace the turbo ducts as well with 80mm suited items?

[slw32]

yeah the apexi 80mm kit is an option for gtr users who want to switch to z32s but as most gtr owners would realise switching from stock afms to z32s is a costly exercise. almost $800 easily.

z32s - $350 each new

80mm pods - $90 - $120 each

afm to pod piping - $200 odd

silicon joiners - turbo duct to 80mm - $100 maybe???

do most retain the stock turbo ducts and then use joiners or replace the turbo ducts as well with 80mm suited items?

Thanx again paul. I wish someone had told me it was such a costly exercise, everyone ive spoken to just says put the z32's on they flow better and you'll be able to get more power out of it. My own fault i guess for thinking that anything on a gtr would be cheap and easy. Can anyone tell me where i could get a adapter kit from?

[R31Nismoid]

You can purchase new Nismo AFM... basically Z32 inside the stock AFM housings

Cuts costs to around $700, and its 100% change over (10mins worth of work if that)

[paulr33]

ace i forgot about the nismo's

can someone give me

stock rb26

picture of label

wiring diagram

nismos for rb26

picture of label

wiring diagram

are they 65mm?

[paulr33]

anyone?

[BOOSTD]

nismo's are exactly the same plug, size and wiring as the stock AFM

[paulr33]

ah ok, what about label?

anyone send me pic of stock rb26 afm label

and wiring

[R31Nismoid]

Get a pick of Jack's (Jag) ones.

I think snowy could be using them aswell... most people are if running bigger turbos and stock piping.

[blk180]

I got nismos laying around some where, just need to find a camrea and cable for it.

[Ronin 09]

I'll get some pics tonight for you...