Jump to content
SAU Community

Recommended Posts

Who has used a KKR turbocharger and what are your thoughts? they sell from otomoto for around 900bux, 260kw from a rb25 on 19psi, pretty damn good, but before i buy i want to know what are your thoughts...

thanks, phill

http://www.otomoto.com.au/kkrturbo.htm

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/
Share on other sites

yeah i was tossing up between kkr and straight rb25 highflow from slide, but i havnt heard of anyone with a slide making over 250rwkw, my aim is sorta 250 - 265, for drifting really. i want really quick spool and bags of power, 3rd gear drift really.

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2541763
Share on other sites

ahh alright fair enough, the vband flange and the wastegate tucked up into the side doesnt look really that good. So you think the slide straight rb25 highflow is the go? good for drift? and also will it be reliable, like will it hold together after a good run?

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2541796
Share on other sites

I would say so... I personally don't own one so I really can't comment.

But if it were the KKR or Slide ... I would choose the Slide.

Then if I was willing to spend a little more I would look at the GCG or possibly a garrett item if a few modifications to ic piping didn't bother me.

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2541817
Share on other sites

hmm fair enough, looks like it will be the slide then :D a good tune with a pfc and 750cc injectors should see me 240 or so at the wheels :D also the cops wont be able to notice the turbo :D but they will hear my straight through 3" trust exhaust :)

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2541830
Share on other sites

well a few updates, getting my centre muffler taken out and a 3" pipe put in, got my profec b spec II tuned.. thanks to me and my brother, pulls like a train on 11.5psi.

and in dec or so im getting a pfc from performance wise, slide highflow, straight drop in injectors (whatever i can find) and hope for 240rwkw.

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2541839
Share on other sites

knock yourself out, but youve mentioned you want no lag.

that isnt possible and both the kkr and slide will have more lag the say a gcg hiflow, this is because its plain or journal bearing vs ball bearing. let us know how u go, interesting to see how it compares

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542076
Share on other sites

not NO lag, MINIMAL lag, as in, i want to see full boost (roughly 16psi) before 3,500rpm and i want great consistancy. I know the slide highflow will deliver it, also i want the power to be a STRONG 240 or so kw. Good for the street and drift.

paul, ofcourse the gcg highflow will be better, but for 800 or so, would you complain if the turbo didnt come side by side with a 1,000+ turbo?

i will be getting the turbo and pfc by around start of december. I also need a new exhaust manifold gasket as mine is cracked, also will b replacing every stud and bolt on the exhaust side.

Should be very sweet and juicy :D

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542094
Share on other sites

i am going the STRAIGHT RB25 HIGHFLOW, which is the r33 housing. The r34 and vg30 are high hp rated because they have bigger housings etc, the straight r33 highflow is what i want, also 240 - 250 rwkw with good spool is my aim.

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542208
Share on other sites

go for it, but *it may* be prone to failure more than a ball bearing unit if you suddently shut off the engine oil + water feed. sure theres a minimal chance, but its a chance.

i understand that there will be more of a chance because the quality in the slide highflow doesnt compare to lets say a garrett unit or a gcg unit. You pretty much get what you pay for. But anything that is better than a stock turbo is good :(

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542212
Share on other sites

Its not the quality its the nature of the bush setup.

Garret journal/bush have exactly the same issues if shut down while spinning hard. i.e an accident.

But saying that I've seen a turbo from japan that was BB and came off a car that was in an accident. The bearings were stuffed.

Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542218
Share on other sites

good point, hey if the car is a write off, the turbo is the last thing on your mind. Ill purchase this turbo when i do turn 18 (november 23) onwards, install, tune etc and let you know about the power i get. So far i have 209.5rwkw on 11.5 - 12psi.

so about the bush bearings. When i turn the car off it hasto idle for around a minute or so? so the turbo can wind down? yes?

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/136706-kkr-turbo/#findComment-2542222
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...