Jump to content
SAU Community

Recommended Posts

Looking to get a T4 flanged single turbo manifold, top mount. Anyone have any experience with specific ones? I've seen vendors like Justjap, roguepi, etc. selling these manifolds, but its really hard to tell quality from just looking at pictures. I already know to stay away from ssautochrome, xs-power, etc... please advise, thanks.

A manifold that will fit a left-hand drive car would be preferable, where the wastegate tube doesnt go right into it, but i realize this may not be possible for anyone to know. my car is a left hand drive s14.

btw I am in the US, so preferably someone who will ship to the states... its tough to find decent single manis here.

Link to comment
https://www.sau.com.au/forums/topic/136720-good-rb26-single-turbo-manifold/
Share on other sites

www.gcg.com.au

The manifolds a few 3-4 ago, were below average china crap and had issues.

However, in the past 2 years there has been much wider use due to much better quality, and people have had no issues relatively speaking.

Its always good to brace a top-mount as much as you can. It stops the

cracking and what not.

so IMO - start with the above and go from there

thanks for the input.. i dont see a 26 mani listed under exoticspeed. i'll inquire via email about it... The gcg one is a T3, i'd prefer a T4 flange if possible... anyone else have experience?

hows the quality of justjap or roguepi? i think they are forum vendors

Edited by gawdzilla
thanks for the input.. i dont see a 26 mani listed under exoticspeed. i'll inquire via email about it... The gcg one is a T3, i'd prefer a T4 flange if possible... anyone else have experience?

hows the quality of justjap or roguepi? i think they are forum vendors

I had a look at the X-Force RB26 manifolds yesterday at Just Jap and the quality of them appears to be very very good and from memory they are around $795 ish with warranty

theres a guy on calaisturbo that makes awesome manifolds, im gonna chek them out this week... n ill let u kno pricing, his work is absolutely top notch!!

HKS kansai sevice extractors, use them on my own car, came with my T04Z kit. havent cracked or shown any signs of wear visible to the eye. thats my advice

i dont quite understand???

The manifold i ude on my own car come from the HKS kansai tuning service. After doing some googleing about them i cam up with some results. Kansai serivice is a devision of HKS that makes custom parts that are vehicle specific. the make the extractors (exh manifold) for the RB26 with a T4 flange and a 50mm ext gate setup. when i bought my T04Z kit from HKS ( a friend who is a importer of japanese cars in my country sourced all the bits and pieces that id be needing for the turbo on one of his regular buisnes trips to japan) he got evrything an the kansai shop. that is what i know of my exhaust manifolds, the manifold is very similar (if not the same) then the one on the sticky tread about cruiseliner who combined a JUN 2.7l with a T04Z, it is stickied in the forced induction preformance guide. have a look.

6boost manifolds.

http://www.6boost.com/ Site atm is only a homepage, but has his email and mobile phone number.

Kyle - 0410 730 598

[email protected]

Great work, they are cast mild steel pipe with extra thick flanges, gives a lifetime warranty on cracking. But to be safe its wise to support it with some extra bracing.

Well that all depends what you want !!!

He makes them to order, and can provide whatever you ask for. Hi mount, low mount, choice of turbo flange, with or without external wastegate flange. Lots of different possibilities for a Skyline.

But a six cylinder with external wastegate might be in the region of just over a grand.

Better to ask 6Boost for a quote.

Looking to get a T4 flanged single turbo manifold, top mount. Anyone have any experience with specific ones?

If you order a 6boost manifold, make sure:

* you tell Kyle what you want it for specifically, in as much detail as is possible. He will be able to tell you

whether or not he can help you. I think each one is made from scratch, using an existing

car as a fit guide, so your requirements of 'fit an S14 LHD' might be harder than they sound >_<

* you get Kyle to _check_ each weld on the manifold individually before he sends it to you (an

unwelded section slipped through QC on mine; which I had to have welded). See

http://www.skylinesaustralia.com/forums/in...113139&st=0

Regards,

Saliya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...