Jump to content
SAU Community

Recommended Posts

Hey All,

need to know a good battery place that might still be open.

over the last week and a half i wud be driving and if i used the high beam for example, the car would give a jerk and the stereo wud pause and come bak and i was thinking someting was wrong with the wiring. but yesterday it died and i had racv come in and then i took it for a drive for like a hour and then tested it and it was starting up alright. today evening i came in and again the battery is dead on its ass?

have anyone had those dunks when u turn high beams or sometimes it would do it even with a parking indicator? WTF@#($#(

anyway post up please witha battery place and any ideas on why it was doing it other than a kaput battery.

cheers

sidd--

Link to comment
https://www.sau.com.au/forums/topic/137924-my-car-is-sleeping/
Share on other sites

just replaced my battery. $115 440cca battery world wantirna although there are a few battery worlds around. didnt have to change terminals either still got the tiny pencil post ones.

like paul said once cars started put multimeter across battery (or jump start points in engine bay) should be at 14v. other test i got told to do was to charge battery, then leave it for 8hrs see if its holding charge. or if you cant be bother just check the voltage before you go to bed disconnect the negative terminal then check voltage in the morning.

not sure if this will set your alarm off though didnt for mine.

basically thats a good idea...

when flat...or new the charge will be at its max...I thought it was a bit higher than 14 on full charge..cos mine went flat a few weeksn back and I remeber it being higher for an initla peroid.

after running the battery in...check the voltage when its off. Make sure it looks cool. When check it in the morning. If the voltage has dropped over night and its new...you have something draining the battery..

I remember I went to my FTO a few months back and the battery was dead...thought it was wierd it just went. nyway went and got a new one and once installed I realised my wife had left the headlights on overnight...hahah anyway I have a spare now...

thanks for all the replies guys.

I went to kmart at burwood east and the guy there didnt have a clue about what was right.

so i had racv come in and replace the battery and he checked it with the multimeter and reckons its charging now.

will check it after a couple of days to see if its charging ok.

sidd--

You know what is weird, my car had the same issue so they replaced the battery and then it did it again but since replacing the battery no issue... and when it was playing up they could not get the battery to loose charge, yet when I am driving along the freeway at 110km/h it managed to do it??

Drew.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...