Jump to content
SAU Community

Recommended Posts

hey.

just had an RBT done and the copper said if he wasnt doing the RBT he'd book me for my tint. i argued with him that it passed compliance etc because the tint is actually in the glass.

anyone (wa preferred) had any issues with this before or do the pit guys just let it ride as it's in the glass?

the back windows are very dark but the front has minor tinting in the glass, same with the rear window. i assume this is standard on stagea's or an option. i have a 96 S1 fully optioned model.

thanks

Shaun

Link to comment
https://www.sau.com.au/forums/topic/139133-stagea-tinted-glass/
Share on other sites

Yes, you can get dicked for it, but you can then just get it passed at a tint place, get them to write them a letter and bill the copper for you time.

I dont think people understand coppers can defect you for ANYTHING they THINK is illegal, regardless if it is or not.

If i got asked about the tint, id tell em to get f**ked and say that the fronts arnt done anyway, so its fine the way it is. Its like a van, which doesnt even have rear windows BUT can have suitable rear seats installed.

afaik in WA the only laws with regards to tint are to do with the front windows and the rears are not required to comply. if i am wrong please feel free to correct me can only comment from my own experiences

when we moved over from the ACT my dad had to take his car over the pits and it was tinted too dark, so the guy at the pits told him to peel off the front windows tint and the rears are no problems.

copper was probably just being looking for a reason to pick on you if it really had been defectable i am sure he would have had no problems with pulling you to the side then and there and slapping a yellow on your car

Yeah same in QLD, because it is not "direct viewable" then it doesnt matter how dark it is. but I had a copper ask me to put up the front two windows to check that they were not "tinted" the same and to his surprise, they werent....... but was told that as long as the front, rear and front side windows were at the legal level for tint darkness then I would be fine.

:wave:

Yeah same in QLD, because it is not "direct viewable" then it doesnt matter how dark it is. but I had a copper ask me to put up the front two windows to check that they were not "tinted" the same and to his surprise, they werent....... but was told that as long as the front, rear and front side windows were at the legal level for tint darkness then I would be fine.

So is your back window see thru??? Mine's black like the side ones.

my hatch door is black also

My hatch is dark also, I can see the tint edge around the wiper motor but looks totally factory standard, possibly applied before the window was installed? (looks that good) Has anyone obtained the documentation that states the windows are "factory" coloured? Might be handy to have it as a download for anyone that needs it... and save some time/pain.

Cheers

Luke

mines black all round... front sides and tailgate matched to the rear sides. have to wind down windows at night sometimes.

Havent been picked up for it yet, i generally have all the windows down while driving anyway. Bit of fresh air, plus the rear windows get a pretty cool angle going on, im sure youre all well aware, and have been asked many times if they are broken.

You can tell it is an aftermarket tint because the front glass is green, but you can only see it in bright daylight. Very cool at night, or when its parked with windows up. Not legal, though, no.

post-24895-1161146605.jpg

My rear window (boot) is black like the side rear ones. Only my windscreen and front driver and passenger window are not dark. I have no problems seeing out at night or anything though.

I've yet to be questioned about the "tint"....touch wood. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...