Jump to content
SAU Community

Recommended Posts

Car got broken into in my driveway last night. Lots and lots of things stolen. Lots of things smashed to steal things.

I am very very unhappy :D

All the Apexi gear was taken (RSM, AVCR, boost guage) so if anyone (particularly VIC members) hears of these and other things for sale in a dodgy manner - notify the police to check it out.

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/
Share on other sites

Really pissed to hear that mate.;) What f@rken a55ho1es!!!

Hope you get your car back to scratch and that the insurance doesn't stuff you around!!

Hate to say this, but sounds like some inside knowledge. How did they know that your alarm is not equiped with some kind of motion detector.

The reason the alarm did not go off is probably due to a lack of motion/infra red sensors. If they didn't open the doors or try to start the car the alarm could not detect the theives. If you wish to not install any motion detectors (as they are known to sometimes false alarm) an idea to to install a 'trigger switch' (similar to the ones in your doors or under your 'hood' and 'boot' lids) in your 'center console' and 'glove box';) . A theif will almost definately look in these areas for goods, and once they are opened they break the electrical circuit and the alarm will trigger. :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/#findComment-280059
Share on other sites

... bunch of savages. I dont understand why they take things like the AVC-R, its useless unless they pop the hood and take the MAP sensor, wiring and solenoid valves as well.

The hide of people, the courts have a lot to answer to, theft like this cost insurance companies $$$, owners heartache, and often these people are known to Police and have committed similar offences before.

... anyone read the comic PUNISHER when they were younger?

Anyways, hope insurance does the right thing by you, and your back motoring soon.

... and AL, is this is DIY job, is it a matter of a few $$$ at Jaycar then wiring them in series with those for the doors???

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/#findComment-280109
Share on other sites

Its weird how most people who have their car's broken into or the ones we here about on here are from Sydney. Is Sydney really this bad? Looking at performance forums almost 95% of the stolen posts are from people in Sydney.

Surely this stuff has to happen elsewhere? I know it would but why does Sydney have so much more car theft then other cities?

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/#findComment-280670
Share on other sites

Thanks all for your support.

I have spoken to the main Apexi distributers here in Melb asking them to notify police if anyone comes in wanting the 'extra' parts of the AVCR and RSM.

Re: serial nos - I don't have any of the ones from the car stuff - as they were on the car already. The other personal items taken had serials - have been given to police.

The GTR-88 plates were taken. If you see them driving around - call the cops.

Re: alarm - I have no idea how they got around it. Really really f*cked. :P

Quite upset about it all. Will keep you posted.

Thanks again

james

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/#findComment-280765
Share on other sites

Jamezilla

Do you have motion/infra red sensors in the car? With a car like that, i would seriously consider an upgrade in car security.

Really sorry to read about loosing all those sentimental goods. A car can be fixed/replaced, but goods that have alot of personal value are priceless. One thing that wasn't stollen were your memories, sounds a little corny, but your gf will always be in your mind and heart.

Link to comment
https://www.sau.com.au/forums/topic/13959-devastating/#findComment-282041
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...