Jump to content
SAU Community

Recommended Posts

HKS intake manifold?

Not a Greddy one?

And I would at least take it and check the AFR's. If it's a Greddy like mine (well rip off version) then your changing the airflow into the engine, so it may or may not affect the tune. I had mine tuned after Plenum got installed, but I was running Power FC before this. Stock ECU is pretty safe with AFR's etc. Just get it checked out

my bad its a hks exhaust manifold haha

I would do work on other people's cars but have been f**ked over in the past and most people piss me off because they see my other projects i've done in the past then they go aahhh that's nice!!!! and want the same thing done to there ride then expect you to it on a shoe string budget and want it done yesterday. I'm sorry but they just ain't gonna fly with me my builds take months sometime years, if you want me to build a car your gonna have to have deep pockets and be committed. Plus it takes time away from my project cars so yeah couldn't be f**ked really doesn't pay well enough for me, rather do and overtime at work. But hey happy enough to help with advice and tooling and shit like that.

That's sort of what happened last weekend, Leon is pretty trusting- He finished the job after 4 hours on my comp rod bushings and told me to take it for a drive to make sure it was sweet. I could of easily f**ked off with the car and never seen him again, but i told him to come with me and i was happy so i paid up!

That's sort of what happened last weekend, Leon is pretty trusting- He finished the job after 4 hours on my comp rod bushings and told me to take it for a drive to make sure it was sweet. I could of easily f**ked off with the car and never seen him again, but i told him to come with me and i was happy so i paid up!

Not the sort of thing you would want to do anyway. Doing that to any business, will only end up costing you more. Only costs $80 to lodge a small claims case.

I got bitten tuning cars early on, hence why I have an ABN and do it more business like now. There are so many assholes out there that think they can just walk away without paying. I've always done a great job and never had a complaint so if someone tried to screw me, I'd take them through small claims just for the principle.

And continuing on from what Ben wrote, this is why I charge for my time. It's half of what all shops charge, but better, and more time and care is taken because I love doing it, and don't do it as my main job. Doing it for free or at too low of a price just gets you burned. And just for the record, all of the so called "mates" that promised services in return never came through. Point proven. People just take shit for granted. Or you get assholes that complain and spread bullshit stories because their eBay turbo that came with a fake 250rwkw dyno sheet only made 190rwkw at anything from 14psi to 24psi, and blame it all on the tuner. Not my problem, learn how to research, dont buy from a kebab shop owner, buy a real turbo.

If you get good service, don't complain, especially if you were dumb enough to but shit hardware.

Wasn't having a go at you Sean, just saying in general.

Edited by The Mafia

Not the sort of thing you would want to do anyway. Doing that to any business, will only end up costing you more. Only costs $80 to lodge a small claims case.

I got bitten tuning cars early on, hence why I have an ABN and do it more business like now. There are so many assholes out there that think they can just walk away without paying. I've always done a great job and never had a complaint so if someone tried to screw me, I'd take them through small claims just for the principle.

And continuing on from what Ben wrote, this is why I charge for my time. It's half of what all shops charge, but better, and more time and care is taken because I love doing it, and don't do it as my main job. Doing it for free or at too low of a price just gets you burned. And just for the record, all of the so called "mates" that promised services in return never came through. Point proven. People just take shit for granted. Or you get assholes that complain and spread bullshit stories because their eBay turbo that came with a fake 250rwkw dyno sheet only made 190rwkw at anything from 14psi to 24psi, and blame it all on the tuner. Not my problem, learn how to research, dont buy from a kebab shop owner, buy a real turbo.

If you get good service, don't complain, especially if you were dumb enough to but shit hardware.

Wasn't having a go at you Sean, just saying in general.

And i'm certainly not the sort of person that would do something like that!

Yeah Leon's just got an ABN i beleive, i am quite impressed with his garage setup too just thought i'd add that in there.

Also in the way of pricing, i would much rather pay $50 an hour to Leon that pay $115 an hour to Pedders when i don't know who the f**ks going to work on the car and they probably wouldn't fix it properly because they don't know my car AT ALL. All good man i completely agree with what your saying.

My Friend is selling his turbo, dump pipe, intake pipe and exhaust manifold if anyone is interested

Specs:

Garett Gt3037

6 Blade Compressor (The good one)

0.6 Surge slotted Compressor Cover (whistles)

HKS 0.82 Internally Gated Exhaust Housing

Extrusion Honed Standard RB25 Exhaust Manifold (Flows as well as a HKS)

3.5inch dump pipe

4 Inch Intake pipe

The guy is very reliable, and will not f**k you around.

Whole setup has only run about 3000-5000kms.

Made 310rwkw on 18psi, loads of torque and response.

Looking for $1700 ono

the 350z had black mags, probably 18-20 looked somewhat like VE club sport ones haha

You mean like those generic black rims with the silver outline around each spoke that every 2nd commodore owner has on their car? I would be ashamed if i had those on my Z!

Cheap shit cheese cutters they use, then they say i can spin the wheels in 4th sounding all cool and shit, then i say how wide are they? Reply: 235's What brand of tyre? Reply: Nankang. My ride on mower could spin them in 4th you f**kwit go buy some decent shit ffs!!!!! :domokun: f**king Falcodore drivers are retarded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...