Jump to content
SAU Community

Recommended Posts

Blocka never actually said anything about you to me... Just to clear that up.

How is it Dyhonest's fault when he, and I quote, DIDNT TOUCH THE TUNING, DIDNT SUPPLY THE NEW HEAD AND ANDREW TOOK IT TO ADRENALIN STRAIGHT AFTER PURCHASE.

No one are muppets or sheep. It's just a small town with a small car scene. The minute your start fiddling on someones car, people are going to talk about the good/bad. And I've never heard a good report about you or your ability. End of story.

Well, I have heard plenty. And continue to do so.

If you want to believe that story then good for you, I've heard different from 3 different people. Just like how you hear things. And its amazing, he buys an engine, and its stuffed straight up. All the fully sic limiter bashing pinging its nuts off must have been real good eh?

And tell those people that weren't happy that I am happy to fix up any issues they may have had. I've been in touch with almost all people I have helped and none have had any complaints.

I'm pretty sure the shit you're dribbling will just be hearsay. Leon backs my tunes 100%, and he's a very honest bloke.

Edited by The Mafia

And I think I know who you're talking about. I guess they shouldn't have f**ked around with the fuel without using a wideband to see if the car was too lean or not. They also had no idea what they were doing.

That particular tune, Clapson saw on the dyno and said himself that it was perfect. (Before it was f**ked with to "try and get more power"). They were fools and I will never touch anything they own based on their dishonesty and general shit talk.

... I don't even know who you are talking about. Honestly. I don't understand how to tune so I have never asked for details.

All I know his splicing, fabricating and continuious welding...

You're 8 years and a legend in your own lunchbox hey Pacey?

Seriously. Where you oxygen starved at birth or is it just when you get onto Forums that you're a complete and utter retard?

Go blow your horn on boost or something. No one here really gives a f**k about how great of a tuner you are.

If they ARE THAT GOOD then let the f**king results do the talking. But i guess that's hard when you must hammer it into everyones head "I AM THE GREATEST TUNER ALIVE"

f**k, you must have 15 calls a day from workshops asking you to come work for them....

Seriously. Go jump on your bike of dicks, and ride it all the way to somewhere that cares about how great you are.

You're awesome too Force fed. Go back to your threads where you blow your own horn and f**k yourself. If someone bagged you out for no good reason or had no hard evidence you'd react the same way.

Wasn't blowing my horn, just getting the shits with people talking shit from hearsay or jealousy - And selling f**ked cars to unsuspecting people as "a perfect running motor"

Edited by The Mafia

No, you blow your own horn every attempt you get

Are you in denial or blinded by your own greatness that you dont even notice?

I get a text once a month "jump on sau. Mackay thread."

If you werent such an utter douchebag people may actually WANT to interact and talk to you

Maybe even ask advice.

Let your results do the talking. Not yourself. Simple

Actually, once I said I was confident in my tuning ability - After many years of actually doing it. Then Nick jumped on it and rode it like a poofter.

Let me guess, the SMS is from Nick? and regarding that that awesome ignition map I posted earlier, with the completely f**k up timing that blew his motor... You know he's pretty much saying you did that.

You're what, 23, and such an expert eh?

I don't really have to comment - My results actually do speak for themselves.

Edited by The Mafia

But yet you do every time you can?

Blaming me? LOL. So you're delusional

As well?

I NEVER, and NICK never touched that tune. Understand that.

We never once altered that tune in any way shape or form. So go blow that out your ass. But i guess being one of his best mates, i wouldnt know that at all.

So go and find where he blames me and ill follow that up

No, he hasnt text me this time. Might of been one of your loyal followers....

Stating confidence once or twice can be every time to you if you want.

I don't have loyal followers... I just do my thing.

keep saying that tune was never touched... I keep hearing differently... lol. A workshop would never EVER do that.

Edited by The Mafia

Get this

Im the flamin mongrel with the laptop

I know what cars have been plugged in and what hasnt

Nicks HASNT had my laptop on it. EVER. None of this cars had my laptop on them.

Simple, you're accusing me of touching his tune. ME. I'm telling YOU. up front. i didnt touch the thing. NOR DID NICK.

Ok, so it wasn't you. I actually thought you were the person that tuned it because he did say it was tuned or worked on in townsville..

I don't even know you remember - Just like you don't even know me.

Why did i not touch it you may ask

Because im not stupid enough to start tuning on a car unless its idling like a pig, without a wideband.

Simple, period. Case closed

Need i shoot you down any further?

Then stop laying blame when you dont have evidence?

1 workshop in townsville and a guy who dows tunes on the side

I've spent more than 2 hours in that car. Probably closer to 150 hours after it was running with motor. It was VERY flat and VERY rich. It went hard. Yes. It needed more timing / less fuel to be anywhere near 11.5:1 or higher, which would mean, it wasnt dangerous.

If anything being too rich may have washed bores. But it wasnt to that point

Edited by Force Fed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...