Jump to content
SAU Community

Recommended Posts

Well I found out what my problem was with pinging..

The fuel was low.. It was only just starting to flash on the red light.

Anyway I was going up a hill dropped it back to second as an idot was doing 60km/h in the right lane, ping ping ping..

NOT GOOD...

Link to comment
https://www.sau.com.au/forums/topic/1400-dont-run-your-fuel-low-pinging/
Share on other sites

Originally posted by MRE

Am yet to see my low fuel light.

I either dont have one or its broke.

I'm with you MRE... I didn't even know we had a fuel light!!

We try and not go under the last 1/4 of the tank. Meaning we only really get around 300k's per tank then we fill up.

Originally posted by NismoGirl

I'm with you MRE... I didn't even know we had a fuel light!!

We try and not go under the last 1/4 of the tank. Meaning we only really get around 300k's per tank then we fill up.

hooly dooly, and you still have 1/4 left??

jeepers - at 300km's from a tank, i am almost desperately trying to find a uel station!!! (although - the other week i got 460km's from my tank on hwy driving... :rolleyes: )

I think the reason its pinging at low fuel is because you may have a heap of **** sitting in the bottom of the tank?? that might be it...

Christian

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...