Jump to content
SAU Community

Recommended Posts

I spent about 2 hours fitting up the plenum etc this afternoon only to realise whilst i was packing up that i had forgotten to put in the last 3 throttle body gaskets between the TB's and the plenum! DOH.. So when i feel motivated i will undo it all and slip them in :ermm:

hehehehe....gold!

man your car is gonna look mint when its done!!! are you going to drive it at all? or are you going to sell it to a collector?

Mr forgetful :) Yeh i'll be driving it on weekends and track days, etc. Plan to show it too. Won't ever be sold! I've spent way too much cash on it to ever think about selling the thing.

I guess i have more motivation than i thought cuz ive already redone the plenum. With gaskets this time! ;)

Deren

lol yeah I can see where you're coming from :) I'm still gunshy even after oil changes - since I botched a remote filter install on the GTR and dumped 5L all over the garage floor in maybe 5 seconds. Er, oops...! God bless rental properties :(

Haha yeh, there should be one of those silly shows called 'When working on cars goes bad' lol. You should see my rental property! Its had a GTR fully rebuilt in house...Literally :P I have some work to do if i ever want to see my bond again hehe.

youve done an incredible job so far mate.. glad to see you still motivated and not bodging things to get it done. also its good to see that your keeping it original and classy.. no candy apple reds on 20's and slammed and trailered to shows.

ive always wanted to do a ground up, especially a gtr, but id hate to get halfway through it and have something happen or run out of cash.. so i stay away.. probs could have had it done by now if id started in my apprenticeship, god knows ive spent 3 times what i would have on buying and modding running cars anyway.

keep it up.

Linton

Thanks mate i appreciate your feedback.

I have actually gotten more particular with it as its progressed. It started out as a respray and has turned into a full on nut and bolt build. Well i can go as far to say nut, bolt and clip build :cheers: Its been a very involved journey over the last 3 years and counting.

I prefer the subtle enhancements, keeping it looking clean. I think they are a very nice looking car from factory so i didnt think it was worth messing with too much as far as exterior looks are concerned.

Engine is hopefully going back in next weekend. Pics to come :)

Deren

Yeah lucky about the blue sky hey! In melbourne i dont think it'll get out much lol

even better then blue sky is if its rained the day before,

when the roads are not only dry but clean (no dust or grime) thats when id take her out, keep her pristine

Thanks mate i appreciate your feedback.

I have actually gotten more particular with it as its progressed. It started out as a respray and has turned into a full on nut and bolt build. Well i can go as far to say nut, bolt and clip build :) Its been a very involved journey over the last 3 years and counting.

I prefer the subtle enhancements, keeping it looking clean. I think they are a very nice looking car from factory so i didnt think it was worth messing with too much as far as exterior looks are concerned.

Engine is hopefully going back in next weekend. Pics to come ;)

Deren

Deren

That's what happened with mine. Well almost. I started mine, then I started watching Overhaulin and American Hot Rod on Foxtel...it's at that point that I started to go nuts on all the detail, including a new model designation, full dynamat and super clean finish on everything! If I had the chance again, the body would have been soda blasted first and started from scratch unlike how it was done. But hey, there's always the next project...which I'm currently looking into, along with a plan on how to go about asking the Financial Controller (my sweet wife ;).

Cheers

Brendan

  • 4 weeks later...

I apologise for the lack of updates lately. I havent had alot to add to be honest as ive been pretty much out of cash for awhile. On top of that i have been waiting to hear back about a couple of things which are halting progress. However i am on holidays currently so i have more time to organise everything at the moment.

This coming week will hopefully see me put the engine back in finally.

Updates to come :)

Deren

I apologise for the lack of updates lately. I havent had alot to add to be honest as ive been pretty much out of cash for awhile. On top of that i have been waiting to hear back about a couple of things which are halting progress. However i am on holidays currently so i have more time to organise everything at the moment.

This coming week will hopefully see me put the engine back in finally.

Updates to come :)

Deren

take your time bro in the end it will be more the sweeter.

  • 2 weeks later...

Hey guys, once again sorry for the lack of updates lately! I've been lazy and not done much to the car so there hasnt been much to write.

However just this afternoon i am happy to say i have purchased some personalised plates for it!

I was amazed to find the plates TUNED-6 were still available so i snapped them up. I'll post some pics when they arrive :)

Hey mate, still planning on getting a NIStune Board. Im also going to get a consult LCD screen. They are nice. Good place to plug in the laptop for tuning too.

Well my ECU came back today with consult cable for my car laptop. Installed all the software (NIStune and Datascan) tonight and plugged into the car to have a look see...

AWESOME!! you can check AFR, TPS, injector duty, timing, etc, plus you can do diagnostics like cut out one cylinder at a time to check for faults, and you can do speed traps! 0-60, 0-100 etc, I can't wait to get it tuned next Friday!

You will not be disapointed!

good luck with the rest of the build mate.

OK plates are pretty cool and i now have a pic of one. I just posted a thread about the spring action clamps i need for my vacuum tubing. Can anyone help? If i cant get them soon i will resort to using a clamp from Wurth. Its not as nice to look at but will do the job well. I just liked how the yellow chromate looked against the blue silicone tubing haha :nyaanyaa:

More soon,

Deren

post-14108-1229417832_thumb.jpg

post-14108-1229417938_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...