Jump to content
SAU Community

Recommended Posts

I spent about 2 hours fitting up the plenum etc this afternoon only to realise whilst i was packing up that i had forgotten to put in the last 3 throttle body gaskets between the TB's and the plenum! DOH.. So when i feel motivated i will undo it all and slip them in :ermm:

hehehehe....gold!

man your car is gonna look mint when its done!!! are you going to drive it at all? or are you going to sell it to a collector?

Mr forgetful :) Yeh i'll be driving it on weekends and track days, etc. Plan to show it too. Won't ever be sold! I've spent way too much cash on it to ever think about selling the thing.

I guess i have more motivation than i thought cuz ive already redone the plenum. With gaskets this time! ;)

Deren

lol yeah I can see where you're coming from :) I'm still gunshy even after oil changes - since I botched a remote filter install on the GTR and dumped 5L all over the garage floor in maybe 5 seconds. Er, oops...! God bless rental properties :(

Haha yeh, there should be one of those silly shows called 'When working on cars goes bad' lol. You should see my rental property! Its had a GTR fully rebuilt in house...Literally :P I have some work to do if i ever want to see my bond again hehe.

youve done an incredible job so far mate.. glad to see you still motivated and not bodging things to get it done. also its good to see that your keeping it original and classy.. no candy apple reds on 20's and slammed and trailered to shows.

ive always wanted to do a ground up, especially a gtr, but id hate to get halfway through it and have something happen or run out of cash.. so i stay away.. probs could have had it done by now if id started in my apprenticeship, god knows ive spent 3 times what i would have on buying and modding running cars anyway.

keep it up.

Linton

Thanks mate i appreciate your feedback.

I have actually gotten more particular with it as its progressed. It started out as a respray and has turned into a full on nut and bolt build. Well i can go as far to say nut, bolt and clip build :cheers: Its been a very involved journey over the last 3 years and counting.

I prefer the subtle enhancements, keeping it looking clean. I think they are a very nice looking car from factory so i didnt think it was worth messing with too much as far as exterior looks are concerned.

Engine is hopefully going back in next weekend. Pics to come :)

Deren

Yeah lucky about the blue sky hey! In melbourne i dont think it'll get out much lol

even better then blue sky is if its rained the day before,

when the roads are not only dry but clean (no dust or grime) thats when id take her out, keep her pristine

Thanks mate i appreciate your feedback.

I have actually gotten more particular with it as its progressed. It started out as a respray and has turned into a full on nut and bolt build. Well i can go as far to say nut, bolt and clip build :) Its been a very involved journey over the last 3 years and counting.

I prefer the subtle enhancements, keeping it looking clean. I think they are a very nice looking car from factory so i didnt think it was worth messing with too much as far as exterior looks are concerned.

Engine is hopefully going back in next weekend. Pics to come ;)

Deren

Deren

That's what happened with mine. Well almost. I started mine, then I started watching Overhaulin and American Hot Rod on Foxtel...it's at that point that I started to go nuts on all the detail, including a new model designation, full dynamat and super clean finish on everything! If I had the chance again, the body would have been soda blasted first and started from scratch unlike how it was done. But hey, there's always the next project...which I'm currently looking into, along with a plan on how to go about asking the Financial Controller (my sweet wife ;).

Cheers

Brendan

  • 4 weeks later...

I apologise for the lack of updates lately. I havent had alot to add to be honest as ive been pretty much out of cash for awhile. On top of that i have been waiting to hear back about a couple of things which are halting progress. However i am on holidays currently so i have more time to organise everything at the moment.

This coming week will hopefully see me put the engine back in finally.

Updates to come :)

Deren

I apologise for the lack of updates lately. I havent had alot to add to be honest as ive been pretty much out of cash for awhile. On top of that i have been waiting to hear back about a couple of things which are halting progress. However i am on holidays currently so i have more time to organise everything at the moment.

This coming week will hopefully see me put the engine back in finally.

Updates to come :)

Deren

take your time bro in the end it will be more the sweeter.

  • 2 weeks later...

Hey guys, once again sorry for the lack of updates lately! I've been lazy and not done much to the car so there hasnt been much to write.

However just this afternoon i am happy to say i have purchased some personalised plates for it!

I was amazed to find the plates TUNED-6 were still available so i snapped them up. I'll post some pics when they arrive :)

Hey mate, still planning on getting a NIStune Board. Im also going to get a consult LCD screen. They are nice. Good place to plug in the laptop for tuning too.

Well my ECU came back today with consult cable for my car laptop. Installed all the software (NIStune and Datascan) tonight and plugged into the car to have a look see...

AWESOME!! you can check AFR, TPS, injector duty, timing, etc, plus you can do diagnostics like cut out one cylinder at a time to check for faults, and you can do speed traps! 0-60, 0-100 etc, I can't wait to get it tuned next Friday!

You will not be disapointed!

good luck with the rest of the build mate.

OK plates are pretty cool and i now have a pic of one. I just posted a thread about the spring action clamps i need for my vacuum tubing. Can anyone help? If i cant get them soon i will resort to using a clamp from Wurth. Its not as nice to look at but will do the job well. I just liked how the yellow chromate looked against the blue silicone tubing haha :nyaanyaa:

More soon,

Deren

post-14108-1229417832_thumb.jpg

post-14108-1229417938_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...