Jump to content
SAU Community

Uas Almost Burnt Down!

OZ GTR35

By OZ GTR35,
in New South Wales

 Share

Recommended Posts

OZ GTR35 Veteran

OZ GTR35

Posted
Posted

Last night the Hobbies in the Hills, hobby shop above UAS was completly destroyed by fire. The fire did not get down stairs so except for being very wet, UAS survived. My car was getting its clutch replaced and I was lucky enough along with all the cars to get out without a problem. I dont think it is known if UAS will be ok but John has a lot of cleaning up to do!

Link to comment
https://www.sau.com.au/forums/topic/140230-uas-almost-burnt-down/
Share on other sites
OZ GTR35 Veteran

OZ GTR35

Posted
  • Author
Posted

Theis stock should be Ok but stuff like computers, phones and paper work will be gone.

The bigger issue will be the chance they will have to re-locate because of the dammage to the upper floors might make the building a write off!

Blitz Grand Master

Blitz

Posted
Posted
Theis stock should be Ok but stuff like computers, phones and paper work will be gone.

The bigger issue will be the chance they will have to re-locate because of the dammage to the upper floors might make the building a write off!

Thats a really shitty situation - glad nobody was hurt all the the cars were safe.

Im watching the footage of the fire on TV right now :P Thats one serious blaze

Beer Baron Grand Master

Beer Baron

Posted
Posted

actually apparently one of the fire fighters was injured :P

you would have to expect a hobby shop would go off like an H bomb. all that flamable glue, pressurised spray paint, model rocket engines, heaps of RC car fuel = KABANG with a side dose of KABOOM!

Does anyone know how the blaze started? I really feel for John as he is going to get reamed through no fault of his own.

Blitz Grand Master

Blitz

Posted
Posted
actually apparently one of the fire fighters was injured :P

you would have to expect a hobby shop would go off like an H bomb. all that flamable glue, pressurised spray paint, model rocket engines, heaps of RC car fuel = KABANG with a side dose of KABOOM!

Does anyone know how the blaze started? I really feel for John as he is going to get reamed through no fault of his own.

According to the reports on Sky news, the cause is yet to be determined, but rest assured, that building is completely forked and will no doubt need to be demolished.

Jimbo2000 Grand Master

Jimbo2000

Posted
Posted

from website

---------------

URGENT NEWS

Due to fire in adjoining premises you may find it difficult to contact us at the moment.

You can fax us on 9634 8888 or email [email protected]

The phone no 9634 8000 has been diverted to one line so there may be delays until the problem is rectified.

If you have must talk to us, and are unable to do so please call 0425 303 019.

--------------

:P:D :D

feel for john and co

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...