Jump to content
SAU Community

Recommended Posts

Im looking at importing a gearbox from Japan as r33 boxes have hit the 3k New Zealand mark now and am just wondering whether anyone has any idea on the dimensions and particular the height of one of these gearboxs.

Any help of even comparisons would be a great help.

Box would be a gtst box

Thanks

Link to comment
https://www.sau.com.au/forums/topic/140529-r33-gearbox-weight/
Share on other sites

wtf 70kg?

umm i have a 34 which i believe is very similar and it probably weighs abit over half that.

My G/box was full of oil when I pulled it out, but it took 2 of us to lift it. I would definatly say that their 70 would be close to the mark.

Cheers

Sumo

My G/box was full of oil when I pulled it out, but it took 2 of us to lift it. I would definatly say that their 70 would be close to the mark.

Cheers

Sumo

Not sure exactly how much they weigh either, but mine also needed 2 of us to lift it so I dare say it would quite likely weigh 50-70kgs (much heavier than a 32 box which I could lift on my own).

about 50 kilos. im not a big guy but ive no problem lifting it.

hrmmm i wonder what i could get for my very low kay r34gtt box with nismo clutch???????

yeah i could lift mine on my own was not that heavy and was a 33gtst box.... i would say 50kg roughly

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...