Jump to content
SAU Community

Recommended Posts

Hey guyz,

i noticed that my climate control is behaving in a very "extreme" manner

when turned to 18degrees (the lowest) it becomes damn cold (@ 18 i presume) and when i increase the temp

to 19degrees it becomes damn hot...like it's at it's hottest...

an electrician told me that it could be my aircon server motor's fault and it requires 2hours of labour just to check it out ...anyone have any good recommendations on what to do?

chock

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/
Share on other sites

Hey guyz,

i noticed that my climate control is behaving in a very "extreme" manner

when turned to 18degrees (the lowest) it becomes damn cold (@ 18 i presume) and when i increase the temp

to 19degrees it becomes damn hot...like it's at it's hottest...

an electrician told me that it could be my aircon server motor's fault and it requires 2hours of labour just to check it out ...anyone have any good recommendations on what to do?

chock

sounds like your mechanic wants to drain your pocket..

In most cases it's your in cabin temperature sensor. Borrow someone's and see if that fixes the problem.

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2624659
Share on other sites

  • 5 weeks later...

I too am having problems with my climate control, it read -30deg for the ambient temp, thinking it was the unit itself that was dodgy I swapped for a spare I had and still reading -30deg. I'm thinking this might explain why I can't get the aircon to work, it just blows really hot air all the time as it thinks it's 30 degrees below zero in the car..

So where is this in-cabin temperature sensor located?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2708745
Share on other sites

I've had the same problem for ages, it will blow hot hot air at any temp setting. I just use the 'FC' function (hold down the cold button for 3 seconds at 18 degrees) on the aircon to get cold air when I need it..... stuff the climate control, I either want it hot, or cold, there is no inbetween :laugh:

If it starts to only blow hot air in any mode, then I'll have to do something about it.

Fixxxer

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2718950
Share on other sites

to the right of the ashtray. a couple of little vent holes on the front of the panel and the sensor is mounted in behind.

Ohhh.. that thing I discovered when I put my stereo in that isn't connected.. I thought it may have been like a mic for an carphone system or something from japan.. pretty sure the wires have been chopped - guess I need to find a wiring diagram and start fishing around behind the dash :thumbsdow

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2720111
Share on other sites

i had the same issues. i just removed the faulty sensor (Left side of dash, under windscreen) and replaced it with a resistor that is the right impedence, to make the climate control think that the intake temp is 30deg.

Edited by R324DR
Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2720175
Share on other sites

So when you turn the climate control on it just cranks the aircon?

Are replacement sensors hard/expensive to get?

Got any specs on the various sensors? says all of mine are shagged :P

Sory for all the questions.. my mrs wants the aircon working :P

Link to comment
https://www.sau.com.au/forums/topic/140816-aircon-system/#findComment-2722614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...