Jump to content
SAU Community

R34 Gtr Gearbox, Radiator, Blitz Nur Exhaust, Trust Front Pipes, Etc

GT51R
 Share

Recommended Posts

GT51R Experienced

GT51R

Posted
Posted

Hi, I have these for sale:

R34 GTR Gearbox done 27,000klms ORIGINAL POA

R34 GTR Radiator $400

Trust Front pipes POA

Blitz Nur SPec Cat Back Exhaust $990

Exeedy Twin Plate Clutch with Lightened Flywheel Done 4,000klms $1700

hanyou Grand Master

hanyou

Posted
Posted

interested in front pipes. pls PM me a price. is it the trust extension front pipe? (combined dump & front)

forgot to mention would they suit a 32 gtr

thanks.,

NIS.26L Rising Star

NIS.26L

Posted
Posted
nup, was perfectly fine! No one told me how much they were worth so i sold it to the only person interested. oh well...

OTHER STUFF HAS TO GO ASAP!!!!!!

im disapointed as you told me in the pm no low ball offers you said they were worth 13k so i thought you must want at least 7k to 8k

GT51R Experienced

GT51R

Posted
  • Author
Posted
im disapointed as you told me in the pm no low ball offers you said they were worth 13k so i thought you must want at least 7k to 8k

well if no one tells me then i dont know, so i sold it. No point crying over spilt milk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Duncan
      NC MX5

      By Duncan · Posted

      Perfect day for a pie, really needs a soft top in this weather though
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Prime parking, she is a little girl...LOL
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...