Jump to content
SAU Community

Recommended Posts

a lot of car companies do testing on those roads. speed and hot weather testing, and obviously a combo of both.

there goes that, or are there other unlimited roads about?

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

a lot of car companies do testing on those roads. speed and hot weather testing, and obviously a combo of both.

there goes that, or are there other unlimited roads about?

They haven't done that in years.

The Europeans don't bring their cars to Australia anymore. South Africa has the same climate that we do, and at least as nice roads, and they're in the same time zone as Europe so their on-site engineers can communicate with home base without stupid shift work.

The Aussies also don't do high speed testing anymore. They used to, but apparently since the OH&S f**kwits have gotten more clout Holden and Ford no longer do V-Max testing on public roads.

truck are speed limited to 100 anyways
I wouldnt say thats entirely true, the amount of times ive been passed on the highway doing 110km/h by a truck.....

Some trucks have 100km/h speed limiters and some dont. We have a fleet of 12 trucks where I work and none have limiters.

But I think what PHAT32 was trying to say is that trucks are techinically not allowed by law to go faster than 100km/h regardless of the signed limit. i.e if the highway has a 110k limit then being the driver of a heavy vehicle you are only allowed to do 100ks.

I stand corrected

SPEED limits to be introduced on Northern Territory roads next year will slam the brakes on an international car testing industry estimated to be worth $9 million.

Car-makers from all over the world flock to the NT for its combination of unrestricted roads and hot weather, but many will abandon their testing programs when the 130km/h speed limit comes into effect from January.

Holden, Toyota and Ford Performance Vehicles will cease or prune their NT testing programs, and sportscar specialist Porsche is expected to relocate to South Africa.

Territory businesses say accommodation, transport and security services will suffer.

"From our point of view speed limits will have a huge effect on the testing business and our members stand to lose millions," NT chamber of commerce chief executive Chris Young said.

Then again, CarsGuide is run by News Interactive...so their quality of journalism can be summed up with two words: "Daily Telegraph".

I am reasonably sure that Porsche, at least, has already relocated the vast majority of their hot weather high speed testing to South Africa already. With better road surfaces, similar weather, and being in the approximately same time zone as Europe, its just a better location for most European companies to do such testing.

And I'd read in Motor (which, I suppose, also gets stuff quite wrong) that Holden / Ford had ceasted doing v-max runs through the NT on their development cars due to OH&S concerns.

Anyway, I wonder if all the speed camera revenue in our most sparsely populated territory will make up for the $9 million shortfall from the loss of business, as well as affecting our local car manufacturers' ability to test their cars in a full range of environments.

I stand corrected

Then again, CarsGuide is run by News Interactive...so their quality of journalism can be summed up with two words: "Daily Telegraph".

I am reasonably sure that Porsche, at least, has already relocated the vast majority of their hot weather high speed testing to South Africa already. With better road surfaces, similar weather, and being in the approximately same time zone as Europe, its just a better location for most European companies to do such testing.

haha is that the truth, or is your News Limited?

i have also read in multiple magazines reference to porsche doing testing in South Africa rather than NT for the last few years.

Either way, all I know is that the NT government can go f**k themselves.

I went up to Uluru around 3 years ago, and the best part of the trip was hitting the SA/NT border and flooring the throttle.

Either way, all I know is that the NT government can go f**k themselves.

I went up to Uluru around 3 years ago, and the best part of the trip was hitting the SA/NT border and flooring the throttle.

I feel the same way, im sure most people do! What a stupid solution to the problem, are they retarded?

I have never had the chance to go to NT but was really looking forward to it, with the new speed limit its that much less attractive to go now.

better off going in winter.

yeah but not because it is any colder up there....it floods like crazy in summer, even down south.

although it was nice and cold overnight (all year round) in alice, just too many animals to hit unless it is the middle of the day

I'd say go now before the new speed limits kick in
although it was nice and cold overnight (all year round) in alice, just too many animals to hit unless it is the middle of the day

Is there a firm date on when the new limit will be implemented?

I am always worried about hitting animals even on backroads in NSW, is the animal situation real bad in NT Duncan?

The worst thing i find around NSW is that usually when there is animals there is bushes around the road so they pop out of no where, im assuming most roads in NT arent that bushy!?

im not going to say anything racist here, but i wonder whose been doin all this....

a few of my dads mates were all up there for a riding tour, cruisin down whatever strip it was at about 160... when a ute comes flyin past em, with like 5-6 people in the back, then a trailor with about 10 more people in there. lol when they got to the other end, there were supposedly less people than when they started but luckily i dont think any of em could count to 16 :(

this isnt really needed mate. keep it to yourself next time

Animals are mostly out between dusk and dawn. No animal aside from humans are generally stupid enough to be wandering around the desert during the middle of the day.

The only time we encountered wildlife was when we were driving back to the resort in Uluru from one of the places nearby at night, and there were a pack of kangaroos jumping across the road.

It was dark by then, and luckily I wasn't driving at that point because chances are I would have been doing 130km/hr and wouldn't have been able to stop in time.

I'd say go now before the new speed limits kick in, but with a turbo car you'd be better off going in winter. :P

sorry to burst ur bubble.....

There is no winter. Just 'Wet and Dry' seasons.

and neither gets gold enough for a turbo :P

i feel for the turbo guys in darwin with skylines. what they are missing out on..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...