Jump to content
SAU Community

Recommended Posts

SDT sell some one use ones from memory. They seem to be a bit more accurate.

Easy way tho. If you are going to drink, just dont drive. Its not worth the risk of the fine, your life, and most importantly someone elses life.

Most males are able to digest or dispose of alcohol at a rate of usually 1 standard drink per hour, or old saying for men 2 standards in first hour and 1 standard every hour after that usually keeps you under .05, to work things out better, if you have roughly on a good round 8-10 jimmy cans at i think 1.9 standards your looking at 17 to 20 hours Minimum to dispose of all alcohol from your blood stream, thats from the moment you start drinking, It is also on a base that if you eat usually helps but is still within your system, 1 standard drink is usually the ammount that a persons liver can process, that is a person that is healthy and has a healthy liver of course, but as above if you going to drink DONT drive.

will it still be on ya breath 20 hours later or just in ya blood stream

short answer : yes

long answer:

its in your breath because its in your bloodstream (lots of blood flows through your lungs otherwise you'd die for several reasons), but the residue alcohol in your mouth will evaporate after you take your last swig, best guess this would take no more than 30min :)

Would it be fair to say the fatter or bigger you are the more alchol it takes to read lets say 0.05% because you have more blood in your system than thinner smaller people.

So in short if you give me 2 coronas in an hour i might read about 0.05%

but

If you give say squizz or mud 2 coronas in an hour he might read about 0.07%

yep spot on... more body mass (more blood= more 'fluid' to act as a solvent) means that for a given dose of something it will be diluted to a greater amount. Also for meds your fat percentage is very important as drugs can be retained in fatty tissue, but this wouldn't apply to alcohol i'm sure.

Real world example - if col and a old lady each consumed a yard glass how many of them would it take to change a lightbulb? if you found that funny you are a skinny bastard that has had 1 beer with dinner and are intoxicated..

the end :(

my $0.02....

i had a $30 one from ebay. It would work and read pretty close to what we expected ONLY if you blew across the sensor the right way. You had to blow through the plastic slits at the right angle, otherwise it'd read nothing. It'd either read accurate, or fully OK to drive.

Then one day i opened it up to see how it worked. I saw a button on the inside that i hadn't seen before. I pushed it and it has never worked since :( I think it was the "callibrate" button and it lost its factory callibration.

not sure if the weight thing is strictly true..

It's only a rough guide the 'x drinks in x hours thing', and will vary person to person - it's not just weight, but that may be a factor, amongst many others (diet, metabolism, fitness levels, how much alcohol you usually drink, cultural, etc).

get one of those breathalyser immobilisers

you have to blow under 0.05 or your car wont start :(

edit: and btw the weight thing doesn't do shit for alcohol, it's the quality of your liver and how well it metabolises alcohol, and if anything else is distracting it at that current point in time (meds, drugs, certain foods/liquids)

i'm on some funky prescription meds, and from those i can tell you that it all comes down to the liver =)

I have one of the Alcohawk Pro Breathalysers, it is extremely accurate as far as personal breathalysers go. Its actually rated better than the Australian Police ones. It is still only a guide though, any reading won't mean shit if you get pulled up and test over.

http://www.halifaxandgeneral.com.au/products.php?id=5000

Halifax and General will also recalibrate them (recommended every 6 months)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...