Jump to content
SAU Community

Recommended Posts

It would be an interesting contest but i reakon that the skyline would have better final drive ratio than the commondore, giving it more acceleration. With the same, power in a lighter car, with better gear ratios i think the skyline would do it. But, obviously the commondore i would expect to have a fare bit more torque so as i said , it would be an interesting race.

It would be torque Vs ratios!

The VT will get a better launch thanks to an auto but if its a decent drag strip where you can go for at least 400m or longer, the GT-T will own the VT as its a good 300kg lighter.

Mind you 300rwkw VT Auto thats N/A is pretty hardcore.

theres a tone of factors. what mods to the diff etc of the VT? is it a series 1 or 2. is the transmission been kitted or anything? what tyres are they running?

what time would a 300rwkw r34 run?

oh and autos run quicker and more consitent times than a manual. :laugh:

this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

hmmm maybe i remembered incorrectly. with the LS1 unlock theres ure 300+rw/kw(would be either europes or US's ecu map) right there. either way its shit cheap to get big power figures out of the ls1's

Edited by yoshimitsu9
also aussie ls1s are 5.7L compared to the yank 4.8L or whatever it is...

with an ls1 all you need is extractor exhaust intake and tune and youve got 250+rwkw easy as. not bad for $3k mods or so.

The problem with the Aussie Ls1's are the tune. Get a good tune, extractors and twin 2.5 exhaust and a decent OTR intake and you'll be pushing 250rwkw, good easy bolt on mods. Injectors won't give you anymore power. With cam will make you around 280rwkw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...