Jump to content
SAU Community

Recommended Posts

friday night about 12-1230ish after finishing work i was dropping a mate home who lives around miranda area.. pictures say a thousand words so here

untitledqk4.th.jpg

some dickheads have thrown somthing off the top of westfield carpark and smashed my back windscreen. lucky it wasnt a brick or anything alike otherwise the person in the back seat would be dead. f*kwits. just my luck eh

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/
Share on other sites

yeah ive rang westfield asking to speak to security but they are giving me the run around and shit.. I'll go down tomorrow and talk to security, the good thing is that there's only one entrance/exit open that late at night. no idea why it should be open at that time. they also said they have video cameras of "most" of the entrances/exits.

on another note with insurance im with famous full comp.. i rang around o'briens and a few other glass mobs they said they didnt stock them and would be very hard/expensive to get.. so i went and got one from a wreckers. not sure if i should tell them/ try to claim or something not quite sure any ideas?

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2642919
Share on other sites

Fark dude.. Bloddy idiots seriously!!

Wish they threw themselves off the rooftop afterwards!!

Seriously security is hopeless up there.

All they do is just sit around the corner and bludge..

Doubt there are any cameras at the entrances or exists..

Let us know what they say...

Btw should have gone straight to the miranda police station.. Its up that road..

Edited by siddr20
Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2643159
Share on other sites

yer.. i got out of the car rang the cops nearly straight away yet it takes them a good 30/40 mins to get there... i rang them again and they said for me to go down to the station because they need a statement or someshit.. i get down there they say they've just sent 2 cars up there.. they said that cant do anything (which i expected)..

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2643655
Share on other sites

saw something similar the other week on george st in the city.. somebody had thrown a bottle or something through the back windscreen of an accord euro.. bastards

THat's just silly though.. It's like gridlock there.. just turn off the car and get out and look for the culprit.

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2644960
Share on other sites

easy solution to westfield problems - let them know that u will be contacting today tonight if they dont start getting with it.

or even better if u know a lawyer get them to write a letter and u will have full cooperation - they just need a little kick thats all.

my friend had some issues with them/getting security tapes but after a letter they got onto it.

yeah ive rang westfield asking to speak to security but they are giving me the run around and shit.. I'll go down tomorrow and talk to security, the good thing is that there's only one entrance/exit open that late at night. no idea why it should be open at that time. they also said they have video cameras of "most" of the entrances/exits.

on another note with insurance im with famous full comp.. i rang around o'briens and a few other glass mobs they said they didnt stock them and would be very hard/expensive to get.. so i went and got one from a wreckers. not sure if i should tell them/ try to claim or something not quite sure any ideas?

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2645382
Share on other sites

saw something similar the other week on george st in the city.. somebody had thrown a bottle or something through the back windscreen of an accord euro.. bastards

Similar thing happened a while back on George St. as well. Someone threw a bottle/glass off the top of a bar/hotel and it (luckily) hit the pavement not a car and sent glass flying everywhere... :)

I had the top down, so I was very lucky, :) but the security was there in seconds, bet they got him cause I saw all the people up on the top of the building in a scuffle...

Link to comment
https://www.sau.com.au/forums/topic/141885-just-my-luck/#findComment-2645935
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...