Jump to content
SAU Community

Recommended Posts

  • 2 years later...
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Okay.

My Supra held dead level, with a R34 GTT (Auto in both)

Later on, I got my rear end handed to me by a V8 VN with an exhaust.

Basically, the R32 would most likley be beaten down like my Supra against a V8 in the VN.

Now against the V6, on the roll, I just start to loose out.

So I'd be hazarding a guess, that the R32 would loose out too (BTW, my Supra IS twin turbo)

Dude, a 2JZ-GTE being beaten by a 5ltr VN?

That doesn't sound right to me :s

An NA Skyline should beat your average AU falcon or commodore(note:SHOULD) as they aren't very quick. At the drags tonight a stock AU falcon was running consistent flat 17's, however a stock EL automatic was running mid 15's the whole night with absolutely no mods. A mates VR commodore with full exhuast, extractors, V8 throttle body, bellmouth removed and shift kit ran 15.7 on his best run. Its the VN/VP commo's and EF/EL falcons that will spank an NA liner quite easily.

An NA Skyline should beat your average AU falcon or commodore(note:SHOULD) as they aren't very quick. At the drags tonight a stock AU falcon was running consistent flat 17's, however a stock EL automatic was running mid 15's the whole night with absolutely no mods. A mates VR commodore with full exhuast, extractors, V8 throttle body, bellmouth removed and shift kit ran 15.7 on his best run. Its the VN/VP commo's and EF/EL falcons that will spank an NA liner quite easily.

i'm guessing that there was something wrong with the AU (like probably done 300,000kms and getting a bit tired). i've driven quite a few of the aussie tanks and i can tell you than an AU will beat a VN or an EF. it won't be by much, but they are faster, and they sure as hell aren't a second slower.

I dunno Marco, I've driven an AU aswell and they feel faster than the old dogs but I think it might be the extra torque that gives it that feel. They are pretty slow off the line cause they are heavy bastards. The VR and EL were much lighter and launched a bit quicker IMO.

was the au auto or manual? you can't compare manual to auto, but still, the stock times for the AU (non xr6) were low 16's for the autos. and the stock times for the EF/EL were pretty much the same. throw an exhaust on them and a set of tyres and you'll get well into the 15's. the xr6's are quicker. there are people with au xr6's into the 14's with CAI and exhaust.

hey, not so true i got a rb20de all stock besides spitfire coilpacks wouldnt do anything anyway but from a stop start i always get to 60 b4 most things besides a few time vs v8 ss xr6 turbo and a r33 gtst but most n/a's that try race me like all of them do i normally get a head then i stop cause dont wanna speed happy.gif then they over take me cause obviously im braking so i dont go over speed limit but yeh last night this dick in a 2007 xr6 n/a was revin shit at me for like 2 kms then at set of lights i gave it to it on lights and beat him to 60 not by much but still did .. i dont know why everyone says rb20de is so shit mine isnt bad at all more power then i thought it was going to have... not saying its reall powerful but not as bad as u would think ermm.gif

i could understand beating aussie 6's because of the fact that their diff ratios are so tall, but seriously, go up against other 4 cylinders (or people who can drive) and you'll find out just how slow it is.

and being able to go from 0-60 fast isn't a sign of power, just a sign of short diff ratios and decent traction (something an rb20 doesn't have to worry about since it has bugger all torque). try launching an aussie 6 or 8 by revving it up and side stepping the clutch like you can in a low torque, high revving car and you'll find that it is suddenly hard to see due to all the smoke.

LOL bozodos get fkd man no shit i kno my car has shit all power im not sayin my car is fast just sayin what has happened ..... all i read on n/a threads are r32 gts are shit and have nothing all im sayin is it does have a bit obviously its not alot since non turbo and rb20de .... what else im a p plate cant drive a turbo or else i would of got one and i love skylines why would i get rid of it ...if i liked say ford / holdens or something else i would of got one but no i dont like any of them at all .. insult to the rest of us hahaha gee dont even know you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...