Jump to content
SAU Community

Recommended Posts

I am wondering if nismo brought out 555cc injectors in almost a burgundy red colour

from pictures ive googled they look identical to the 740cc

I also thought the part number may be listed on the actual injector instead. the only text i can see is 'made in japan'. Any ideas how i can tell if they are fake?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/142876-red-555cc-nismo-injectors/
Share on other sites

pics?

who did you buy them off?

Do you want to see any particular angles?

I bought them from a registered business in perth. Workshops i have spoken to recommend them as being honest.

He got them from a guy who sells performance parts to a number of workshops in the area.

post-9455-1163244460.jpg

post-9455-1163244491.jpg

Nismo 555cc injectors for r33 are yellow, 740cc are red.

Thats what i thought but he swears black and blue they are 555cc

The only thing im really worried about is that if they are not genuine, they might be a lower quality and fail on me

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

good advice althou when i bought my nismo 740cc they didnt come sealed in plastics they where just in a nismo box.

You better get them flow tested because you need to know what they are rated or else your going to have a hard time putting in the injector duty cycle value in an aftermarket ecu

This is a comparison between nismo injectors and my injectors. they look quiet different to me. infact ive found some on ebay that look the same selling at about $330 US (set of 4)

http://cgi.ebay.com/ebaymotors/740cc-Deats...7QQcmdZViewItem

post-9455-1163323533.jpg

post-9455-1163323638.jpg

Where did you get the injectors from?

The deatschwerks ones are hiflow injectors. I just installed deatschwerks injectors into my R33. They are stamped with a number on the injector plug which corresponds to the flow report. IF they don't have the number stamped on them, then they are most like not Deatschwerks

you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

Edited by James_03
you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

Yep they are JECS 550cc I have exactly the same ones that got delivered yesterday :) They are not NISMO but they are good injectors.

What would be an average price for a set of 6? are they as expensive as the nismo ones?

I got them off another forum member still in their plastic for about $100 each. I was happy with that seeing as other ~550cc injectors are around $140+ each.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...