Jump to content
SAU Community

Recommended Posts

I have a 94 gts25t r33 skyline, it says its got about 56k on the clock, which i somehow find hard to beleive for a vehicle nearly 10 years old, the car seems to run fine, with the only thing replaced according to the car yard i bought it from being the clutch, and a few other things so it was eligable for complience.

1. My question is, how can I determine the real amount of kilometres it has driven? someone mentioned a compression test on the cylinders? ( I COULD BE QUITE WRONG HERE )

2. It has a silver sticker on the engine with the nissan text, logo, some writing in japanese, and down the bottom a very clear 100,000km's written. Does this mean this car has had a 100k service????? I hope this isn't the case although I wouldn't be too suprised :).. The car didn't have service history, so it is hard for me to tell what the deal is, it's running okay I say again, but I'd just like to know roughly what these things are..

:P

Cheers

comp test always good to see how teh engine is regarless of indicated kms

silver sticker is teh timing belt replacement km sticker...........

If that belt was put on in OZ during compliance just for maybe...

if put on in Japan shes been wound back

it definately isnt from teh factory

you buy a timing belt you get the sticker

I import alot of front cuts only the 80k kms plus ones have them

seeing teh residue on a sticker thats been removed is a good indicator you've been dialed back also

Thanks MrMayhem.

Is it illegal for people to sell cars claiming certain kms clocked in, knowing that the clock has been wound back? from a car yard eg: toyota dealer, selling this as a used vehicle. I have a feeling it would be breaching some agreement maybe even just within thewarranty I have with the dealer. Any ideas what the deal is with the law regarding this, thanks in advance.

Cheers

as far as i know, that silver sticker says in jap 'replace timing belt at 100,000km and comes factory. when it is replaced, it is written on or near the sticker, indicating the exact km when it was changed. my skyline has the sticker and its done 75k km.

pic attached, looks like another sticker has been stuck next to the factory one, and written on.

Is it illegal for people to sell cars claiming certain kms clocked in, knowing that the clock has been wound back?

Dont know but not a very ethical way to be running a business.

When i picked up my R32 a couple of years ago, their was a grey R32 in the same yard. Had adjustable control arms, and Teins and susp work up the bazoo, exactly what i wanted.

It even had less kms then the silver one i ended up buying. The silver was a nicer looking car, and essentially stock, but hey i had never owned a nice looking ride so didnt care, my heart wanted the grey one.

Imagine my surpirse when the car yard owner said dont buy the grey one, theres no way the kms are original and the silver car is the one to have... and i might add he was right the car has been great.

There isnt much Aus dealers can do when they are wound back in Japan, except do as this individual did and bring it to the buyers attention.

As for timing belts, well i change it and a few other things when i buy a car, kind of like tranferring the rego. You never know.

  • 10 months later...

We'll here's my timing belt sticker and it looks like it was changed in Japan @ 95017km on the 8th month of the year H12 (2000)

The belts on the fan and the alternator look pretty new. But I think I have to squeeze under the car to inspect the timing belt don't I?

it definately isnt from teh factory

you buy a timing belt you get the sticker  

Maybe you do.. but it also comes from the factory.. as every GTS-T i have seen has one on there. They will generally write the km it has been changed in pen or the like if it has been changed - like HappyPuppy's pic shows.

Km on a skyline are largely irrelevent, and it disspoints me to see buyers say things like "oh I'm looking for a skyline with 60,000km, yours is 90,000km and not worth looking at". These are not local cars people!! Most of the winding back has been in japan, where its actually illegal also.

If you could find *evidence* that a local dealer did it, you could get them in trouble - getting that would be nigh on impossible, and most of the time its been done way before it gets into local hands. Most dealers know that, and like Roy says, some will even be honest about it. Likewise you can simply change the whole instrument cluster (an 30minute job) and you'd be none the wiser.

Glenmcrae: A compression will only give you a bit of a general indication of the internal strength left in the engine. It will not tell you km at all, as compression could be way down on a car with a genuine 60,000km or fine at 200,000km.. all on how the car has been treated. More modifications will often mean that the engine compression may be otherwise worn premeturely. Often more boost = more pressure on the pistons, rings, head gasket, valves springs, etc and may result in reduced compression over time.

The only real check is to just go on visuals such as paint fade, seat wear, steering wheel, gearboot and handbrake boot wear, carpet wear, and the number of small scratches, etc -- in the end it doesn't really matter. If the car is running well, looks good, and everything else, the km are the last thing you should worry about. .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is <2k rpm, going to WOT sees the MAP go +ve even before it crosses 2k and it has >5 psi by the time it hits 90 km/h. That's still <<2.5k rpm, so I think it's actually doing really well. Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
    • Oh, it's been done. You just run a wire out there and back. But they have been known to do coolant temp sensors, MAP sensors, etc. They're not silly (at Regency Park) and know what's what with all the different cars.
    • Please ignore I found the right way of installing it thanks
    • There are advantages, and disadvantages to remapping the factory.   The factory runs billions of different maps, to account for sooooo many variables, especially when you bring in things like constantly variable cams etc. By remapping all those maps appropriately, you can get the car to drive so damn nicely, and very much so like it does from the factory. This means it can utilise a LOT of weird things in the maps, to alter how it drives in situations like cruise on a freeway, and how that will get your fuel economy right down.   I haven't seen an aftermarket ECU that truly has THAT MANY adjustable parameters. EG, the VAG ECUs are somewhere around 2,000 different tables for it to work out what to do at any one point in time. So for a vehicle being daily driven etc, I see this as a great advantage, but it does mean spending a bit more time, and with a tuner who really knows that ECU.   On the flip side, an aftermarket ECU, in something like a weekender, or a proper race car, torque based tuning IMO doesn't make that much sense. In those scenarios you're not out there hunting down stuff like "the best way to minimise fuel usage at minor power so that we can go from 8L/100km to 7.3L/100km. You're more worried about it being ready to make as much freaking power as possible when you step back on the loud pedal as you come out of turn 2, not waiting the extra 100ms for all the cams to adjust etc. So in this scenario, realistically you tune the motor to make power, based on the load. People will then play with things like throttle response, and drive by wire mapping to get it more "driveable".   Funnily enough, I was watching something Finnegans Garage, and he has a huge blown Hemi in a 9 second 1955 Chev that is road registered. To make it more driveable on the road recently, they started testing blocking up the intake with kids footballs, to effectively reduce air flow when they're on the road, and make the throttle less touchy and more driveable. Plus some other weird shit the yankee aftermarket ECUs do. Made me think of Kinks R34...
×
×
  • Create New...